Bio Plastics and Chemicals for Global Sustainability, Global Petrochemicals: Searching for Some Good News, Recent Advances in Polypropylene Technologies, Technology Trends in the Polyethylene Industry, Long Chain Branching in Slurry Polymerization, Sirius Catalyst Technology, Polyolefins, Catalysts and Sustainability, AcvtivCat ™ -- Customer Supported Catalysts Employing our Next Generation Family of Activators, The Influence of Supports on Polyethylene Catalysts, Advanced Metallocene-based R-TPO produced with Gas-Phase JPP HORIZONE PP Process, Global Polypropylene Catalysts - Markets and Trends, Linear Alpha Olefins and Polyolefins Comonomer Technology Overview, A Technological Approach to the Processing and Long Term Stabilization of HDPE Pipe, A Solution for UV Irradiation Protection Using a Novel Hindered Amine Light Stabilizer, High Performance UV Barrier Additives Based on Dispersed Transparent Metal Oxides, Why Does Chlorine Make my Pipe Performance Go Down the Drain?, Optimized UV Stabilization Systems for TPO and TPE Applications, Impact of Various Acid Scavengers on Phenol and Phenol Free Stabilization Systems in a Film Grade ZN-LLDPE Blending of Cyclic Olefins in sLLDPE for Improved Bubble Stability and Output Rates on Blown Film Extrusion Processes, Using Adhesive Resin Blends As A Starting Point for Clear Retort Structures, Specialty/Value Added Polyolefins - Preparing for the Upcoming Global Race, Single-Step Heat Seal Coatings for Film Substrates: Simpler, Faster and Thinner, Thermoforming Enhancement With Cyclic Olefin Copolymers, Tailored Polyolefin/Layered-Silicate Nanocomposites with Novel Functionalities, Comparison of Post Consumer Recycled Polyethylene and Virgin Polyethylene used in Trash Bags, Polypropylene Block Copolymers for Use in Sewage and Drainage Applications, An Overview of New Technology for Rehabilitating High Pressure Gas/Liquid Pipelines, Finished Product Stress Crack Evaluation for Corrugated High Density Polyethylene Pipe, Biodiesel and HDPE: New Products from Lyondell/Basell Used in Plastic Fuel Tanks, Packaging Needs and Concerns for Photovoltaic Modules, Co-Extrusion Separator Technology Platform for HEV/EV, Heat Seal Die Improvements for Single Serve Condiment Packets, Improved Flexible Packaging Film Barrier Performance Via Layer Multiplication, Process, Structure and Properties of Cast and MDO Stretched Films of HDPE, PP and Blends of Random and linear PPs, Equipment and Processing Considerations for Extruding Bio-Resins, Screw Optimization for PLA Resins, Tools for Process Improvement, Graphite Nanoplatelets: A NanoReinforcement for Modifying Mechanical, Thermal, Electrical and Barrier Properties of Polyolefins, Nanomer® Nanoclay Modified Polyolefin Nanocomposites, Perkalite® - a unique and versatile nanoclay, POSS® Dispersion and Flow Aids for High Performance Polyolefins, Development of a Novel Mixing Technique, Nano-layers in Blown Film, Practical Approach to Modeling Multiple Reactor HDPE Process, Performance of Wood-Plastic Composites: Issues of Modulus and Moisture Absorption, Applications of New Thermal Techniques to polyolefins: Rapid Heating, Isothermal Re-crystallization, DSC-Raman and TG-GC-MS Techniques, A Study of Polymer Architecture with FT-Rheology and Large Amplitude Oscillatory Shear (LAOS),Topology of Long Chain Branched Polyethylene Using Sans, Correlation of Melt Flow Rate with Apparent Viscosity from a Capillary Rheometer and Dynamic Viscosity from a Dynamic Mechanical Analyzer, Characterization of High Density Polyethylene with Ultra High Molecular Weight and Broad Polydispersity via Triple Detector Gel Permeation Chromatography, New North American Jetfine® Talc for Optimum Stiffness/Impact Performance, Recent Additive Development for Rotational Molding, Transparent PP Modification with Kraton® Polymers via Dry-Blending and Injection Molding, Improved Aesthetics in Clear PP Bottles, Development Status of PP-Nanoclay Hybrid at Honam Petrochemical Corp. in Korea, An Innovative Solution for Clarified Polypropylene, Surface Enhancement of TPO Polymers with Improved Flow and Scratch Properties, Characterizing the Structural Performance of Flexible Packaging Flims and Thin Rigid Plastics for Drop Loadings, Troubleshooting Case Studies- Center for Flexible Packaging, Permeation, What it is and How it effects you, Infrared Imaging Use in the Analysis of Fish Eyes and Multilayer Films, Non-nuclear, non-contact measurement of multi-layer films and packaging using super-luminesent technology, Polyethylene: a Dosimeter for use with Ionizing Radiation, Talc-TPO Formulations for High Stiffness and Ductile Impact at -40 C, Performance and Mechanism of a Hybrid-type Antioxidant, A New Concept to Reduce Odor and Emissions in Polyolefin Compounds, Liquid Antioxidants Cost-Effective and Innovative Products for Polyolefin Stabilization, Stabilization Strategies to Extend the Service Life of Polypropylene, New Approaches To Flame-Retarding Polypropylene, New Innovative Antistat and Antifog Additives for PE and PP Film, Reactor Modification of High Pressure Low Density Polyethylene with Diene and Its Application, The Effect of polyethylene Structure on Dielectric Properties and Breakdown strength, Technology for Insulating HV and EHV XLPE Cables, Extrusion of Zero Halogen Flame Retardant Compounds for Wire and Cable Applications, Industrial Electron Beam Processing of Polyolefins, Plastics and Sustainability, New Products Exemplifying Sustainable Development, An Alternative Bio-Based Polyethylene, A Study of the Advances in Biodegradable Plastics, Life Cycle Inventory of Treated Ground Calcium Carbonate: A Cradle-to-Gate Study, Determination of Mark-Houwink Relationships and Long Chain Branching in Polyolefins Using Triple Detection GPC.