Vacuum Thermoforming
“In the most common method of high-volume, continuous thermoforming of thin-gauge products, plastic sheet is fed from a roll or from an extruder into a set of indexing chains that incorporate pins, or spikes, that pierce the sheet and transport it through an oven for heating to forming temperature. The heated sheet then indexes into a form station where a mating mold and pressure-box close on the sheet, with vacuum then applied to remove trapped air and to pull the material into or onto the mold along with pressurized air to form the plastic to the detailed shape of the mold. (Plug-assists are typically used in addition to vacuum in the case of taller, deeper-draw formed parts in order to provide the needed material distribution and thicknesses in the finished parts.) After a short form cycle, a burst of reverse air pressure is actuated from the vacuum side of the mold as the form tooling opens, commonly referred to as air-eject, to break the vacuum and assist the formed parts off of, or out of, the mold. A stripper plate may also be utilized on the mold as it opens for ejection of more detailed parts or those with negative-draft, undercut areas. The sheet containing the formed parts then indexes into a trim station on the same machine, where a die cuts the parts from the remaining sheet web, or indexes into a separate trim press where the formed parts are trimmed. The sheet web remaining after the formed parts are trimmed is typically wound onto a take-up reel or fed into an inline granulator for recycling.” (Wikipedia, Vacuum Thermoforming, 8/27/2011)
Recent US Patents
To go to the text version of the patent, click on US Patent Number Search and enter the patent number in the search box. 11/25/2009 US Patent 7,455,510 Apparatus for forming high-impact transparent, distortion-free polymeric materials
Recent Journal Articles
To get to the abstract or article, copy the citation and paste it into favorite search engine (ex. Google). The date is the date the entry was found.
Review Articles
To get to the abstract and the article, open up your internet search engine and copy the title to the search box. Once on the Journal's website, find the year and issue. Then scroll to the article. The date is the date of the entry made on this page.
Editor's Notes
As the literature is reviewed, and items of interest concerning this topic are found. These may be added in an abbreviated form with the reference. Readers and contributors are invited to add their own notes. Contributors may add them directly and other readers can simply send their notes to the editor, Roger Corneliussen at rcorneliussen@4spe.org. He may edit and add them to this page at his discretion.