SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

Compounding of Conductive Polypropylene/Graphite Composites
P.E. Poirier, D.J.Y.S. Pagé, P.J. Bates, May 2005

Polypropylene (PP) and Natural Graphite Flake (NGF) composites were prepared by three methods using a high-speed thermo-kinetic mixer. The electrical conductivity of the materials was measured as a function of NGF content. Mechanical and rheological properties were characterized to assess the composite's potential to be processed for applications such as fuel cells.

Environmental Stress Cracking – Examples from the Automotive Indsutry
Jeffrey A. Jansen, May 2005

Four case studies are presented to illustrate environmental stress cracking (ESC) within automotive components. ESC is a very important mode of plastic component failure. The presented cases illustrate how the failure analysis process was used to identify the failure mechanism as well as the primary factors responsible for the failures. The four cases depict representative automotive failures involving varied designs and service conditions.

Injection Velocity Control in Plastic Injection Molding
B. Pramujati, R. Dubay, J.G. Han, May 2005

Injection velocity is a difficult process to control due to its complexity and nonlinearity. Different dynamic characteristics with variations in melt temperatures and materials occur. A control strategy using simplified predictive control (SPC) was developed and implemented for injection velocity having wide ranging multiple velocity profiles. The experiment results have shown that the SPC control of injection velocity has good setpoint tracking performance.

The Effect of Calcium Carbonate Particle Size on PVC Foam
Frederic Marchand, Bahar Azimipour, May 2005

CaCO3 is the predominant filler used in polyvinyl chloride compounding. Selection of fillers, as in the case with other compounding ingredients, involves consideration of available types and their effects on processing, product properties, and economics.In this paper the effect of the particle size of CaCO3 on the properties of PVC foam is investigated. The paper analyzes the correlation between fusion time, extrusion torque, and foam density as well as foam cell structure with the filler particle size.

Initial Expansion Behavior of Butane-Blown LDPE Foam at Extrusion Die Exit
J. Wang, P.C. Lee, C.B. Park, May 2005

A CCD camera was used to observe n-butane-blown LDPE foams at the extrusion die exit. The effects of butane content, nucleating-agent (talc) content, aging modifier (GMS), die temperature, and geometry on the initial expansion behavior of the foam extrudate were studied. A transparent section of the foam extrudate was found at certain die temperatures. The reasons for the existence of this transparent section and its effect on the processing conditions and material formulations are discussed.

The Manufacture of Aligned Poly(Acrylonitrile) Fibres by Electrospinning
C. Laffin, G.M. McNally, R.D. Sanderson, C.J. Greyling, May 2005

Electrospinning is a process used to obtain nano-diameter randomly deposited fibres by electrostatically drawing a jet of polymer solution onto an electrically grounded metal sheet. This work reports on a novel method of obtaining aligned fibres of poly(acrylonitrile) (PAN) by means of an electrospinning process and investigates the effect of polymer solution concentration and take off speed on fibre diameter and molecular orientation.

Mechanical Properties of Short- and Long-Glass Fibrereinforced Polypropylene Compounds
X.Y. Dai, P.J. Bates, May 2005

The tensile and impact properties of two short- and two long-glass-fibre-reinforced polypropylene compounds were measured on injection-molded and machined specimens. It was found that mechanical properties were strongly dependent on the glass fibre length and orientation with respect to the flow direction.

Overview of Property Development in Layered Silicate Polymer Nanocomposites
Lloyd A. Goettler, May 2005

This work reviews approaches to fabrication and property development in various layered silicate polymer nanocomposites, including the roles of thermodynamics and hydrodynamics in determining the nanoscale structure. Material is taken from the specific research of the author over the past decade, with emphasis on nanocomposites comprising polymer blends, as well as from some of his prior review papers (1, 2, 3).

Exfoliation in Pa-6/Clay Nanocomposites by Melt Processing
N.K. Borse, M.R. Kamal, V. Mollet, May 2005

Nanocomposites prepared by various methods were characterized using transmission electron microscopy, wide angle X-ray diffraction, mechanical testing and oxygen permeability measurements. Correlations were made between structural parameters (e.g. aspect ratio, dspacing) and the mechanical and barrier properties of the nanocomposites. Higher aspect ratios of filler lead to significant improvements in mechanical and barrier properties.

ESCR Thresholds Evaluated by Observation of Interfacial Surface Energies
Peter J. Walsh, Alan J. Lesser, May 2005

This work probes a hypothesis for initiation of environmental stress cracking (ESCR) based on a thermodynamic criterion for localized stress induced swelling. The threshold metric involves observation of solid-vapor surface energy and contact angle of a liquid on a loaded polymer substrate and thus inference of solidliquid interfacial surface energy with respect to substrate stress. The intent is to develop a screening technique for ESCR that is not limited by the kinetics of the crazing event.

Solid-State Processing of Polymer in the Presence of Supercritical Carbon Dioxide
Xianbo Hu, Alan J. Lesser, May 2005

Open cell microporous bisphenol-A polycarbonate (PC) films are made by a novel, solvent-free processing: drawing PC in supercritical carbon dioxide (scCO2). The pore size is less than 1.0 micron and the porosity is in the range of 20%-70%, and is highly tunable. The porous film has mechanical properties nearly as high as the original film. The influence of temperature and pressure on drawability, porosity, and mechanical integrity are systematically studied.

Degradaton Mechanisms and Environmental Effects on Poly Pphenylenebenzobisoxazole (PBO) Fibers
Alan J. Lesser, Xianbo Hu, Peter J. Walsh, May 2005

Recent reports have shown the fibers made from polyp- phylenebenzobisoxazole show a significant reduction in properties after relatively mild exposure to environmental conditions. This paper discusses potential mechanisms responsible for the degradation and reports results on degradation of fiber properties due to various environmental exposure conditions.

Extrusion Pulverisation of Elastane Fibres
D.A. McGroggan, G.M. McNally, J.S. Ramsey, May 2005

A novel ram extrusion process for the size reduction of various grades of poly(urethane urea) (PUU) fibres (elastane) is described in this work. The process was performed over a range of shear rates and temperatures. SEM and GPC analysis results showed significant reduction in both particle size and molecular weight of the poly(urethane urea) as a result of the extrusion pulverisation process.

Properties of the Oxidized HDPE Obtained from Continuous Extrusion Blow Molding Process Machinery
Rakhil M. Sinelnikova, Valery G. Makarov, May 2005

Deterioration of a barrel sleeve in a forwarding and solids compaction zone of a blow-moulding unit increases the heat exchange time and negatively affects the stability process.It has been shown that gel, formed by oxidation and structurization of high-density polyethylene (HDPE), sharply differs from HDPE in density, fluidity, dissolution of additives, and interaction with a metal surface.The research established the reason of worsening quality container and restoring stability of blow moulding.

Cellular Anisotropy in Mechanical Properties of Polyurethane Foam
Akihiko GOTO, Kazumi YAMAGUCHI, Umaru S. Ishiaku, Hiroyuki HAMADA, May 2005

We suggested that the cell shape in the polyurethane foam could be approximated to be the simple oval. We have investigated the relationship between the mechanical properties and the cell structure of the polyurethane foam. Deformation of cell structure was observed under the tensile load. Cellular anisotropy of the polyurethane was examined.

Continuous-Time Dynamic Exogenous Modeling from Plant Data
Derrick K. Rollins, Nidhi Bhandari, Natalie M. Matos, Swee-teng Chin, Stephen W. Mohn, May 2005

Dynamic models that describe strong physical relationships are typically difficult to create from plant data. The application of a recently developed method by Rollins, et al. for Hammerstein block-oriented modeling to 3M data revealed feasibility. The Hammerstein system consists of a nonlinear static block followed by a linear dynamic block.

Estimation of Distributions of Crystal Sizes from DSC Melting Traces for Polyethylene
Lijun Feng, Musa R. Kamal, May 2005

Melting curves from differential scanning calorimetry are used to estimate crystal size distributions. The proposed theoretical analysis is applied to polyethylene polymers, especially for linear low-density polyethylene copolymers. Theoretical predictions are in agreement with experimental results. The corresponding melting temperature distribution characteristics are calculated from the crystal size number distribution.

Prediction of Heat Treatment Effects on Injection Moldings
M.R. Kamal, T.S. Saini, May 2005

A comprehensive study was conducted on the shrinkage of rectangular injection molded plates (HDPE and PS), using a 3-D thermovisco- elastic simulation of the process, to estimate shrinkage in the flow, cross-flow, and thickness directions. The simulation was then extended to estimate the effects of a post-molding heat cycle. The results were in good quantitative agreement with experimental results.

Polymer Composites Based on Agave Fibres
Dinorah M. Gómez, J. Ricardo Galindo, Rubén González-Núñez, Denis Rodrigue, May 2005

Low density polyethylene was blended with agave fibres of three sizes: 0.21, 0.81 and 1.11 mm. Fiber concentrations between 10 and 25% were used to produce composites using twin-screw extrusion and injection molding. To determine the effect of processing on mechanical properties, uniaxial traction and impact resistance were obtained, in relation with morphology and density. The results show that there is an optimum concentration and fibre length for each processing technique.

What is 6 Sigma - A Case Study of Designing a Color Center of Excellence
Edward E.D. Tucker, May 2005

6 Sigma has been around for some time. It is being used to control products to decrease their defects. Here is how 6 Sigma can be used to design and sucessfully implement a Color Center of Excellence.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net