SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

Mechanical Properties of High Density Polyethylene Foams
Yaolin Zhang, Denis Rodrigue, May 2004

High density closed-cell HDPE foams (450-950 kg/m3) were prepared by compression molding using 0-3 wt.% azodicarbonamide as a chemical blowing agent. The samples were then used to measure their flexural, shear, and tensile moduli. The data obtained were compared with models to determine which one represents best the overall property of these polymer foams. We found that thin skins (0-5%) have an important effect of the flexural and shear moduli of polymer foams, while they seem to have negligible effect on tensile properties.

Effects of the Die Geometry on the Expansion Ratio of Polystyrene Foams Blown with Carbon Dioxide
Xiang Xu, Chul B. Park, May 2004

This paper presents the effects of the die geometry on the expansion ratio of extruded polystyrene (PS) foams blown with CO2. Three groups of interchangeable filamentary dies were used to thoroughly represent the die parameters. The experimental results reveal that a strong relationship exists between the expansion ratio of extruded PS foams and the die geometry through its effects on the pressure-drop rate, die pressure, premature cell-growth time and initial shape of extrudate.

New High Heat Polyetherimide Resins
Roy R. Odle, Robert R. Gallucci, May 2004

A new polyetherimide homopolymer with a Tg of ~250°C has been produced. The resin has the melt processability of lower Tg polyetherimides but increases heat related properties by ~30°C. The performance features of this resin will be discussed along with some of its polymer blends. The new polyetherimide sulfone is miscible with existing polyetherimides allowing a range of transparent materials to be produced.

High Flow Glass Filled Polyetherimide Blends
Robert R. Gallucci, May 2004

Glass filled polyetherimide blends can offer a wider range of attractive performance features: non-halogen flame retardancy, high strength and stiffness and excellent dimensional stability. One drawback to these resins has been their relatively low flow in injection molding applications. New additive technology has been developed that can improve flow ~25-35% while retaining other important performance features. Commercial products using fiber glass and milled glass blends have been developed using this new technology.

Evaluation of Different Methods of Measurement for the Isotropic Stress Development in Curing Thermosets
Mikhail Merzlyakov, Yan Meng, Sindee L. Simon, Gregory B. McKenna, May 2004

We have developed two novel methods for measuring isotropic stress development in thermosetting resins during cure and subsequent thermal cycling. We use a sealed stainless steel spherical pressure vessel and thick-wall tube to impose three-dimensional isotropic constraints. The strain at the outer surface of the load cell is monitored by strain gauges. The isotropy of the stresses in tension and compression are examined for both methods.

Recent Advances in Organic Semiconductors for Optoelectronic Applications
Bernard Kippelen, May 2004

During the last decade, semiconducting conjugated molecules and polymers have undergone a rapid development and show promise as low cost alternatives to the materials used in current technologies such as silicon and other inorganic materials. In this talk, we describe recent advances in their use for real-time holographic processing, and in organic electro-luminescent devices for displays.

Conjugated Polymers for Controlling Light
Karolina P. Fritz, Rena M. Greenwald, Gregory D. Scholes, May 2004

It is of interest to develop new anisotropic materials for light emission. To this end, we have aligned poly[2-methoxy-5-(2’-ethylhexyloxy)-1,4- phenylevinylene], MEH-PPV, in two different nematic liquid crystalline matrices, pentylcyanobiphenyl, 5CB, and a mixture of n-cyanobiphenyl liquid crystal, E7. Their alignment was investigated through linear dichroism measurements. Based on this work, a new family of optoelectronic devices and display technologies can be envisioned.

Study of Shark Skin and Die Swell of Calcium Filled-Polyethylene by Laser Micrometer and Scanning Electron Microscopy
J. Lou, V. Harinath, Z. Xu, J. Sankar, May 2004

Laser micrometer and scanning electron microscopy were used to study the die swell and shark skin of calcium filled polyethylene. The results were strongly correlated with the filler loading and the temperature.

Structural Characterization of Linear Low-Density Polyethylene (LLDPE) Using Thermal Analysis
Patricia L. Roberts, Sunggyu Lee, May 2004

The structural properties of eight linear low-density polyethylene (LLDPE) resins are investigated using thermal analysis by differential scanning calorimetry (DSC). A thermal segregation technique was used to characterize the short chain branching distribution of the resins. Although each of the eight resins has a similar density and melt index, the molecular structures are all very different, with regard to the frequency and distribution of branching.

Aromatic Hydrocarbon Content of Plastic Packaging Materials
Myer Ezrin, Gary Lavigne, May 2004

Common food and drug plastic packaging materials of polyethylene, polystyrene, polyvinylchloride and polyethylene terephthalate have been analyzed for aromatic hydrocarbons using thermal desorption gas chromatography/ mass spectroscopy. All four types contain detectable levels of benzene, toluene, xylenes and naphthalene compounds. The source, at least in part, is believed to be gasoline vapors in the air. Polystyrene contains the highest level of aromatic hydrocarbons.

A New Toughening Method for Thermosets
Nam Ho Kim, Ho Sung Kim, May 2004

A new toughening method which can be used for modifying thermosets is developed. An epoxy resin system is used for demonstration. Expandable hollow microspheres are also used for modification of the resin system. Heat treatment was conducted to produce compressive residual stress around hollow microspheres in solidified epoxy. Toughening mechanisms are discussed. A cavitation criterion in the presence of compressive residual stress is proposed.

An Approach to Couple Mold Design and On-Line Control to Manufacture Complex Composite Parts by Resin Transfer Molding
Jeffrey M. Lawrence, Mathieu Devillard, Suresh G. Advani, May 2004

Resin Transfer Molding (RTM) has been used to manufacture advanced composite parts. In this paper, we present the design and validation of an automated RTM intelligent workstation. A new injection method, which can deliver the resin to various locations within the mold, while still allowing any individual gate to be opened or closed at any time during the filling, was designed and tested.

A 3D-Simulation Study of Barrier Properties of Nanocomposite Films
Charles Swannack, Christopher Cox, Douglas Hirt, Anastasios Liakos, May 2004

Nanocomposite polymer-clay films are inherently complex systems. Many classical and recent models study this system in two dimensions via a “brick-like” structure. However, a 2D approach may not sufficiently capture 3D effects. The results of a 3D simulation will be presented which examines the effects of various geometries on the computed diffusion coefficient will be presented. These results will then be compared to existing models.

Process Simulation of Structural Long Fiber Thermoplastic (LFT) Composites with Features of Geometrical Complexity
Shane Bartus, Chad Ulven, Uday K. Vaidya, Selvum Pillay, Gregg M. Janowski, Klaus Gleich, May 2004

The use of long fiber thermoplastic (LFT) composites has been increasing in the mass transit and automotive industries, as a result of the progress made in new materials and processing technologies. The present work focuses on process simulation of the extrusion-compression molding process for LFTs. Material and process parameters were varied to investigate the flow front and fiber orientation in typical structural shapes such as flat sections and ribs.

Composites Derived from Post-Consumer Nylon 6 Carpet
John Muzzy, Youjiang Wang, Melinda Satcher, Bryan Shaw, Andrew McNamara, Josh Norton, May 2004

Over 2 million tons of post-consumer carpet is landfilled each year. This waste carpet is a potential resource for composites. Since waste carpets can be rapidly identified and sorted by face fiber, this paper focuses on the processing and properties of nylon 6 post-consumer carpet. The carpet is cleaned, shredded and extrusion pelletized. This feedstock is compounded with glass fibers and compatibilizers. Based on the properties achieved and the projected costs, applications are identified.

Fiber-Reinforcement of Composites by Reaction-Induced Phase Separation
Amit Chandra, Sadhan C. Jana, May 2004

A new class of fiber-reinforced composite materials is being designed in our laboratory by using a hybrid of thermoplastic and thermosetting polymers. The thermosetting polymers form separate phase upon reaction-induced phase separation and create morphology on the fiber surfaces. Consequently, strong fiber-polymer bonding of thermosetting composites and high fracture toughness of thermoplastic polymers are obtained from the same composite.

Assessing the Use of Lower Ordered Tensors in Numerical Predictions of Flow-Induced Fiber Orientation
David A. Jack, Douglas E. Smith, May 2004

Orientation tensors are widely used to describe fiber distributions in short fiber reinforced composite systems. This paper considers the effect of using lower order tensors in process simulations, and when computing mechanical properties for the composite structure from the flow calculations. Evaluations are performed by reconstructing the distribution function from successively higher order orientation tensors in a Fourier Series representation. Examples of fiber orientations in simple flow fields are provided.

Characterization of Polyetherimide and Polystyrene in Shear Flow
J. Lou, A. Shahbazi, V. Harinath, May 2004

Filled thermoplastic polyetherimide and polystyrene samples were prepared and their morphological and melt processing properties were studied with respect to the processing conditions and filler loadings. The results should provide insights that are needed to solve complex issues encountered in the industry dealing with the recycling and processing of this important class of thermoplastic materials.

Application of Image Processing Technique in Analyzing Microstructure of Nanocomposites
Chuan-Yang Wang, Han-Xiong Huang, Zhi-Min Xie, May 2004

An image processing program suitable for analyzing the microstructure of polymer/organic-montmorillonite (org-MMT) nanocomposites was developed based on the MATLAB software. The TEM photomicrographs of polypropylene/org-MMT were analyzed using the program. It has been revealed that the shape and size of the MMT in nanocomposites can be determined effectively and promptly by using the image processing program.

A Carbon Nanotube Alternative: Graphite Nanoplatelets as Reinforcements for Polymers
Hiroyuki Fukushima, Lawrence T. Drzal, May 2004

Intercalated natural crystalline graphite compounds [GICs] were formed followed by exfoliation and milling to produce sub-micron graphite flakes. SEM and TEM images showed that the average size of graphite became 0.86 um with a thickness of around 5 nm. The cost of this new nano-size graphite material was estimated to be around $5/lb or less. Since exfoliated graphite has superior mechanical, electrical, thermal properties and cost effectiveness, this material has been shown to be a superior potential reinforcement for polymer nanocomposites.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net