SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

Application of a Reliability-Based Methodology for Predicting the Outdoor Service Life of Polymers
Joannie W . Chin, Jonathan W. Martin, Tinh Nguyen, Edward Embree, Walter E. Byrd, James D. Tate, May 2002

Organic polymers are a commercially important class of materials that are being increasingly used in outdoor applications such as paints, coatings, sealants, siding and roofing membranes, to name just a few. One of the most damaging elements in the outdoor environment is ultraviolet (UV) radiation, both alone and in conjunction with moisture and temperature. Conventional ways of predicting the weatherability" or service life of a polymer involve either outdoor testing performed in real time or accelerated laboratory testing using artificial UV sources neither of which have proven to be entirely successful.The High Performance Polymeric Building Materials Group at NIST is developing a reliability-based methodology for predicting the service life of a polymeric material in outdoor environments. The NIST approach makes use of methodologies that are well-established in the biological and medical communities. In the course of advancing this new methodology a number of novel instruments for conducting UV exposures have been developed. The basis for the new predictive methodology and the novel instruments used for laboratory UV weathering will be discussed."

Application of an Online Rheometer to Evaluate the Melt Properties of PVC
Andreas Limper, Gordon Fattmann, May 2002

A portable online rheometer has been developed for characterizing plastic melts that can be used for different measurement applications. The rheometer is intended particularly for use in rigid PVC processing. An adapter mounted between the screw tip and the die implies that it is possible to conduct measurements on virtually all the different types of extrusion lines. During the development of the rheometer, particular value was set on having an instrument that is compact and universally deployable. Apart from viscosity curves, the rheometer can also be used to reveal wall slip effects.

Assessing the Interphase in Polypropylene/Glass Composites
Jeff Toke, John Muzzy, May 2002

The bonding in polypropylene (PP)/glass composites is inherently weak due to the non-reactive polypropylene matrix. Traditional sizings are only useful in increasing the interfacial strength when compatibilizers are added to the matrix. Currently, maleated polypropylene (mPP) is widely used to improve the bonding in PP/glass composites; therefore, the overall properties of the composite are improved.A better understanding of the contributions of the mPP's is desired. This research investigates the interphase in PP/glass composites using in-situ Near-IR fiber optic techniques and glass bead composite mechanical properties.The in-situ infrared technique utilizes a lead doped high refractive index silica glass fiber. The Near-IR source is guided down a single fiber. An evanescent wave is used to concentrate the area of investigation to the interphase. The glass fibers are coated with ??aminopropyltrimethoxy silane (??APS). The results compare several commercial grades of maleated polypropylene blended with a 20 MFI homo-polypropylene. Overall mechanical properties of the injection-molded composites will be analyzed in conjunction with the infrared studies.

Asymmetric Conductive Heat Transfer Resulting from Air Gap Formation during Shrinkage
Andric Thamsir, Robert A. Wolf, May 2002

In injection molding processes, an air gap is formed between the cavity steel and plastic part as shrinkage occurs throughout the cooling phase. Considering the significant difference between the thermal conductivity of P-20 steel (41 W/m·?C) and air (0.0383 W/m·?C), the air gap is a potential medium for creating an asymmetric conductive heat transfer within the plastic part. This assumption of different heat transfer behavior was studied by using finite element analysis and flow simulation packages. The results were contrasted to those of the symmetric behavior. The conclusions made discuss the practical needs of considering the air gap formation in cooling designs and its probable impact on qualities of plastic parts.

At-Process Spectroscopy and Ultrasonic Monitoring of Polymer Melt Processing for Process Monitoring and Control
S.E. Barnes, M.G. Sibley, E.C. Brown, H.G.M. Edwards, I.J. Scowen, P.D. Coates, May 2002

The use of spectroscopic techniques in the analysis of polymer production processes is becoming more prevalent. At-process methods allow for real-time information on a variety of melt characteristics to be collected. Several analytical techniques are being explored for in-line and on-line use during extrusion processing of polymer melts, with a view to characterising polymers for process monitoring and control.In-line ultrasonic velocity measurements have been made simultaneously with on-line mid- and near- infrared and in-line Raman Spectroscopy during single screw extrusion of a range of blends of an HDPE and a PP. The sensitivity of these techniques to changes in blend composition is being assessed and compared. The techniques show very close agreement in monitoring the dynamics of change from one blend composition to another.

Automated Sheet Die Design
Louis G. Reifschneider, May 2002

This paper reports on a method of integrating extrusion die design with state-of-the-art computer-aided design programs. The design of a coat hanger extrusion die is automatically optimized using a parametric based three-dimensional polymer flow simulation algorithm. The optimal parameters determined by the optimization algorithm are input to a parametric-based computer-aided-design program to yield tool path for die fabrication. A prototype coat hanger die is fabricated according to the material selection and process conditions specified. Experimental flow distributions match the predicted flow distributions within acceptable experimental error. Because this approach employs three-dimensional flow analysis, it can readily be extended to profile die design.

Automotive Requirements for DuPont Engineering Polymers in Integrated Air Fuel Systems
Dino S. Tres, May 2002

Automobile companies are looking with increasing frequency at composites (engineering polymers based matrix) to reduce weight, cost and to improve the recyclability of their powertrains.Air Intake Manifolds (AIM's) and Integrated Air/Fuel Systems (IAFS) have emerged as prime candidates for conversion from metal to composites and market penetration in North America is above 80%.This paper will present the state of the art for materials in these applications including real life examples and analysis.Also we will share some of DuPont new offerings in these market that provide significant system cost reduction while performing better in a more demanding environment.

Balance between Drop Dart and Izod Impact: Predicting Performance in PVC Window Profile Compound
Steven R. Rapacki, May 2002

Drop Dart Impact Testing is now widely used to predict the performance needed in window profile fabrication and use. It evaluates formulation effects and strength developed through proper processing. Izod Impact Testing has shown some utility as a predictor of not only strength, but as a better way to differentiate ductility and crack propagation properties of profile compounds, important in the fabrication stage. This paper will discuss the relative merits of both tests, and how they can be used to differentiate additives that contribute to impact and fabrication performance.

Ballistic Impact Resistance of Composites with Different Fabric Structures and Configurations
John W. Song, Margaret Auerbach, Nainesh Amin, Michael Price, Charles Roche, Stephen Petrie, May 2002

Ballistic performance of fiber-reinforced composites with different fabric structures and configurations was studied. Composites with Kevlar-KM2 ripstop fabric performed better against smaller size projectiles due to the effective fiber failure through constraining of the fibers, while hybrid composites constructed from ripstop fabric of Kevlar-KM2 and Spectra-1000 show an advantage with larger projectiles due to the effective strain energy absorption. Hybrid composite configuration of these two structures exhibited overall performance improvement.

Basic Mechanisms of Structural Ordering in Uniaxial Stretching of PLA Using Fully Automated On-Line Birefringence Coupled with True Stress-True Strain Measurement
Jake Mulligan, Miko Cakmak, T.Z. Sen, May 2002

Fundamental deformation-structure relationships in melt cast amorphous Poly(lactic acid) (PLA) films were investigated using a stretch birefringence apparatus that allows for direct measurement of true stress, true strain, and birefringence at realistic strain rates. The relationships between stress, strain, and birefringence are strongly affected by the processing conditions: temperature, stretch ratio, and stretching rate. The molecular mechanisms of this deformation and the effects of process variables on these are elucidated in this study.

Basic Principles in Materials Selection for Mechanical Fastening of Thermoplastics
Val A. Kagan, Stephan P. Weitzel, May 2002

In this current paper, we are discussing basic principles in materials selection, which focused on utilization of the light alloys for manufacturing of fasteners for thermoplastics applications.Proposed fastener(s) material replacement (from steel to aluminum) will allow to manage the stiffness considerations, short-term (strength) and long-term (life) performance of the assembled plastic parts for various automotive applications.The results from this investigation provide recommendations on materials pre-selection for the design of fastened thermoplastic components with improved mechanical performance.

Basic Screw Geometry Things Your Screw Designer Never Told You about Screws!!""
Timothy W. Womer, May 2002

In the plastics industry today and as has been since the start of plastic extrusion, the end user has depended on the Original Equipment Manufacturer (OEM) and/or screw manufacturer to supply them with the proper screw design for their material and process. Most processors have learned over the years a few critical points pertaining to screw design, but never totally understanding the reason why their suppliers have recommended certain aspects to the screws that they have purchased. Hopefully, this paper will explain some of the basic knowledge needed in order for an end-user to make the proper decisions when using or purchasing a new single screw for a smooth bore application.

Basic Studies on Uniaxial Deformation of Nylon 6 - Clay Nanocomposite Films
Zeynep Ergungor, Miko Cakmak, Celal Batur, May 2002

The changes in the birefringence and the true stress-true strain behavior of cast nylon 6 and nylon 6-clay nanocomposite films are monitored online as they are stretched uniaxially below the peak melting temperature. The effects of draw temperature (100°-140°-180°C) and clay content (2 and 5 volume%) are investigated by means of online measurements and X-ray diffraction. The presence of nanoplatelets in the nylon matrix enhances the uniformity of stretching by suppressing the localized necking behavior at these essentially cold drawing temperatures. At a given stress, the birefringence decreases as the clay content increases. This is quite interesting and perhaps is related to reduction of structural connectivities by reducing the polymer entanglements in the presence of these very small nanoparticles. The development of birefringence correlates well with the strain rather than the clay content or the stretching temperature. The crystalline phase of the as-cast films is ?-form. Stretching promotes the formation of ?-crystals at all draw temperatures for nylon films. At low draw temperatures, the nanocomposite films also assume ?-phase, while at 180°C they display a mixture of ? and ? phases.

Biaxial Stretching and Structure of Various LLDPE Resins
A. Ajji, J. Auger, J. Huang, L. Kale, May 2002

The purpose of this study is to investigate the biaxial stretchability, the structure developed, molecular orientation and shrinkage of linear low-density polyethylenes (LLDPEs) biaxially stretched using a laboratory biaxial stretcher. Seven resins having different molecular characteristics were used in this study. The effect of stretching temperature and rate on stretchability is assessed. Biaxial orientation factors for the crystalline axes as well as that of the amorphous phase were determined using FTIR spectroscopy. SEM was used to reveal the details of the crystalline stacking and shrinkage of the films was determined.

Blends of Polypropylene (PP) and Polycarbonate (PC) Using Functional Polyolefin Elastomer (FPOE) as a New Compatibilizer
Hui Tang, C.L. Beatty, May 2002

Polypropylene (PP) and Polycabonate (PC) is an immiscible polymer pair. When blended together, it separates into two phases. It generally yields poor practical properties. The final morphology of the blend has a controlling influence on its mechanical properties. In this study, Functional Polyolefin Elastomer (FPOE) is used in the blends of Polypropylene (PP) and Polycabonate (PC) as a compatibilizer to control the morphology and to strengthen the interfaces in this blending system. With addition of FPOE, the size of PC domains is reduced and interaction between different phases is greatly improved. The mechanical property of the blends with FPOE, such as impact strength, is significantly improved. FPOE can be applied for the blending of PP and PC as a new effective compatibilizer [1-8].

Blocking of LLDPE Films - Effect of Surface Morphology
Olivier Vincent, Eric Osmont, Françoise Sommer, May 2002

The mechanism of LLDPE blown film blocking has been investigated. Film specimens exhibiting different levels of blocking force were fabricated using resins with various molecular characteristics. The film surface morphology and the chemical composition were studied. Atomic Force Microscopy observations allowed to link clearly blocking with the formation of a soft layer at the films interface. This layer is made of amorphous PE chains, migrated from the bulk of the film during conditioning at 60°C. No evidence of co-crystallisation at the interface was observed. The chemical nature of the soft layer has been derived from its mechanical properties. A predictive model for film blocking is proposed based on a single molecular parameter.

Blown PP Based Coextruded Films as an Alternative for the Flexible Packaging Industry
German V. Laverde, May 2002

New PP resins are available in the market allowing for the production of coextruded or monolayer blown films with particular properties. Some advantages are associated with lower resin densities and higher modulus in comparison with other commodity resins. Currently, PP also has a significant price advantage in many market. High stiffness and high clarity can be achieved when PP is coextruded with PE, allowing for thickness reduction depending on the final application. This paper presents a comparison of mechanical and optical properties among structures using different polypropylene resins and different layer thickness.

Capacitive Sensing Dielectrometers for Noncontact Characterization of Adhesives and Epoxies
Darrell Schlicker, Yanko Sheiretov, Andrew Washabaugh, Neil Goldfine, May 2002

Recently developed capacitive sensor geometries provide new capabilities for characterization and manufacturing quality control of low conductivity dielectric materials. Novel geometries incorporating multiple sensing elements within a single footprint permit profiling of the properties with depth (such as dielectric constant, conductivity, loss tangent, complex permittivity and layer thicknesses) from one side of the material. These sensors permit absolute property measurements with minimal calibration requirements and noncontact measurements where the air-gap thickness is also being measured. This paper reviews the sensing technology and its use in cure monitoring of epoxies and adhesives in thick and thin film applications.

CAPE-VIT - A Different View of Education in Plastics Design
H. Elmecker, A.M. Brito, A.S. Pouzada, May 2002

Education for the growing needs of the plastics industry is recognized as needing a different approach that will enable a quicker integration of the graduates in the working world. Under the auspices of the EU programme Leonardo da Vinci a group of universities and institutions developed a course programme and structure for preparing engineers with skills for plastics design and processing with a sound awareness of the environmental issues. Specific characteristics of the course are the project driven methodology and the integration of training periods in the industry as from the first year of the four-year long course.

Capillary Rheometer Pressure Transients for Lubricated Flows through Straight and Semi-Hyperboloidal Dies
Bhaskar Patham, K. Jayaraman, May 2002

Pressure transients in lubricated “skin-core” flow of a long-chain branched polypropylene (PP) are studied in two axisymmetric dies, one a straight die of diameter 1.0 mm and L/D ratio of 10, and the other a semi-hyperboloidal die designed to offer a constant extensional strain rate and a Hencky strain of 4.88. Stable flows are obtained for the melt and flow parameters with which the experiments are conducted. Lubricated flows through straight as well as semi-hyperboloidal dies exhibit longer and non-monotonic pressure transients.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net