SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Applied Rheology

SPE Library content related to rheology
RELATIONSHIP BETWEEN SHEAR STRAIN AND MICROSTRUCTURE OF POLYPROPYLENE NANOCOMPOSITE BASED ON RHEOLOGICAL ANALYSIS
Guo Jiang , Han-Xiong Huang, May 2010

Polypropylene/clay nanocomposite was compounded by a twin-screw extruder. Rheological property development of samples collected from four different positions along the extruder and microstructure of the endobtained samples was investigated. Flow field parameters including shear rate and residence time profiles were simulated. Then the shear strain was calculated. The relationship between the shear strain and microstructure of nanocomposite was analyzed based on rheological analysis. Results showed that dispersion of clay in polymer matrix can be reflected by the shear strain generated by the flow along the extruder.

RHEOLOGICAL BEHAVIOR OF POLYACRYLONITRILE COPOLYMERS PLASTICIZED WITH WATER
Kaan Gunes, Avraam I. Isayev, May 2010

The presence of water can dramatically lower the melting point of polyacrylonitrile (PAN) homo- or copolymers and make it possible to melt-spin high acrylonitrile (AN) content PAN fibers. However, the behavior of PAN-water melt has not been adequately investigated and the rheology data for PAN-water melt is not available in literature. We developed pressurized capillary rheometer and used it in PAN/Vinyl Acetate (VA)-H2O viscosity measurement successfully. The shear viscosity at 195?øC decreases as water content increases from 17 wt-% to 23 wt-%. The rheology of PAN-water melt can be useful in characterizing the melt and spinning PAN precursor fibers.

ULTRASONICALLY-AIDED EXTRUSION OF PEN/LCP BLENDS
Kaan Gunes , Avraam I. Isayev, May 2010

Ultrasonic extrusion of polyethylene naphthalate (PEN), LCP and their blends was studied. Rheological, morphological, thermal and mechanical properties of the samples were investigated. Viscosity of PEN decreased with ultrasonic treatment, while that of the blends decreased at an amplitude of 10 ?¬m. Viscosity of LCP was unaffected by ultrasound. Blends treated at an amplitude of 10 ?¬m had larger LCP particles in moldings, leading to reduced mechanical properties in the blends. The results indicated that ultrasound had the predominant effect of degrading the PEN matrix and hindering LCP fibrillation in the blends, thereby masking possible compatibilization effects introduced by ultrasound.

ENHANCED COPOLYMERIZATION OF PEN/PET BLENDS DURING ULTRASONICALLY-AIDED EXTRUSION
Kaan Gunes , Avraam I. Isayev, May 2010

PEN, PET, and their 50/50 blend were ultrasonically extruded at various amplitudes.Rheological, thermal, mechanical, morphological and spectroscopic characterizations of the untreated and ultrasonically treated samples were carried out. Fast homopolymerization during extrusion of PET was foundto occur at an ultrasonic amplitude of 7.5 ?¬m. In contrast,degradation of PEN was observed with ultrasonic treatment. Ultrasonic treatment at short residence time led to the enhancement of transesterification reaction in the PEN/PET blend, indicating that more copolymerization occurred during ultrasonic treatment.

UNEXPECTED RHEOLOGICAL BEHAVIOR OF NOVEL LOW-Tg TIN FLUOROPHOSPHATE GLASS/POLYAMIDE 6 HYBRIDS WITH ENHANCED BENEFITS
Qian Qin, Jin Katena, Yan Meng, Joshua U. Otaigbe, May 2010

By incorporating special low glass transition inorganic tin fluorophosphates glass (Pglass) into polyamide 6, the latter exhibits unprecedented non-Einstein-like viscosity decrease in the liquid state and an increase in Young's modulus in the solid state. This behavior makes the hybrid Pglass/polymer solid material stronger yet easier to process in the liquid state. The linear rheological behavior is discussed in terms of the hybrid components rheology. The results should beneficially impact our ability to prepare lower viscosity, highly filled polymers using already existing polymer processing methods, making the simple strategy potentially widely applicable in a number of applications such as barrier resistant thin films and flame-retardant polymer composites.

THERMALLY-EXPANDABLE MICROCAPSULES FOR POLYMER FOAMING – ITS EXPANDABILITY AND VISCOELASTICITY
Yasuhiro Kawaguchi , Daichi Ito , Yoshiyuki Kosaka , Takeshi Nakachi , Hiroshi Kake , Jae Kyung Kim , Haruo Shikuma , Masahiro Ohshima, May 2010

The thermally expandable microcapsule is a new type of blowing agent for polymer foaming. It has a core and shell structure. A low boiling point hydrocarbon liquid is encapsulated by the shell of acrylonitrile co-polymer. Mixing the microcapsules with the thermoplastic polymer and letting them thermally expand in the polymer can foam the polymer. In this study we developed a new microcapsule so that it can be used at high operating temperatures over 200 oC for foaming polypropylene (PP) by injection molding and extrusion. We investigated the effect of viscoelasticity of the shell polymer on the expandability of the microcapsule as well as on the surface appearance. The visual observation of batch foaming the rheological measurement and the experiments of foam injection molding and extrusion elucidated the existence of the optimal degree of cross-linking of the shell polymer that could realize the superior expandability and appearance at PP foam injection molding and extrusion.

THERMALLY-EXPANDABLE MICROCAPSULES FOR POLYMER FOAMING – ITS EXPANDABILITY AND VISCOELASTICITY
Yasuhiro Kawaguchi , Daichi Ito , Yoshiyuki Kosaka , Takeshi Nakachi , Hiroshi Kake , Jae Kyung Kim , Haruo Shikuma , Masahiro Ohshima, May 2010

The thermally expandable microcapsule is a new type of blowing agent for polymer foaming. It has a core and shell structure. A low boiling point hydrocarbon liquid is encapsulated by the shell of acrylonitrile co-polymer. Mixing the microcapsules with the thermoplastic polymer and letting them thermally expand in the polymer can foam the polymer. In this study, we developed a new microcapsule so that it can be used at high operating temperatures over 200 oC for foaming polypropylene (PP) by injection molding and extrusion. We investigated the effect of viscoelasticity of the shell polymer on the expandability of the microcapsule as well as on the surface appearance. The visual observation of batch foaming, the rheological measurement and the experiments of foam injection molding and extrusion elucidated the existence of the optimal degree of cross-linking of the shell polymer that could realize the superior expandability and appearance at PP foam injection molding and extrusion.

RELATIONSHIP BETWEEN PROPERTIES, CITRATE CONTENT AND POSTPRODUCTION TIME FOR A PLASTICIZED POLYLACTIC ACID
Jungjoo Lee, Lih-Sheng Turng, May 2010

Due to the recent interest on citrates as a biodegradable plasticizer for Polylactic acid PLA, several PLA blends that were plasticized with tributyl citrate TBC were prepared in a co-rotating twin screw extruder. A range of 12.4 to 22.5% by weight was considered for the plasticizer content. The thermal, rheological and mechanical properties were correlated with the plasticizer content and compared with pure Polylactic acid. Additionally, the change of these properties as a function of postproduction time was studied and correlated with the plasticizer permanence.

THE HIGH PRESSURE RHEOLOGY OF POLYMER NANOCOMPOSITES CONTAINING SUPERCRITICAL CARBON DIOXIDE
Thomas W. Shoaf, May 2010

Supercritical carbon dioxide has advantages of high solubility to the polymer and recovering easily by depressurizing, and it is expected to be use as a plasticizing agent. In this work, we studied on the effect of scCO2 on rheological properties of plastomer layered silicate nanocomposites. A rotational viscometer has been adapted to measure the viscosity of polymer under high temperature and pressure conditions. The rheological properties of Plastomer nanocomposites was performed at experimental conditions of various temperature and pressure. We observed that viscosity of polymer was dramatically reduced by CO2 addition.

PS FOAMS BLOWN FROM HFC-134a/HFC-32 BLENDS: PROCESSING BEHAVIOR
Michel F. Champagne , Richard Gendron , Jacques Tatibouët, May 2010

Manufacturing of extruded polystyrene (XPS) foam insulation boards is currently based on weak ozone depleting gases. Mixtures of blowing agents are actually seen as one of the most promising solutions to ozonedepleting substances phase-out. This paper investigates various blowing agent formulations based on mixtures of hydrofluorocarbons HFC-134a (1,1,1,2-tetrafluoroethane) and HFC-32 (difluoromethane). The study focuses on the rheological (plasticization) and degassing (solubility) behaviors of the formulations, as measured on-line during foam extrusion. Rules of mixing for such blends of HFCs are proposed based on the relative contribution of each component to the overall processing behavior.

INFLUENCE OF PROCESSING CONDITIONS AND POLYMER CHARACTERISTICS ON SURFACE TOPOGRAPHY OF SMALL BORE TUBES
Peng Xiang-fang, Peng Jun, Xie Xiao-li, Turng Lih-Sheng, May 2010

The topography of the inner surface of small bore extruded tubes used in fluid handling applications can affect flow rates, fluid turbulence and biofilm adherence. Quantitative surface roughness analysis of tubes manufactured from different polymers has shown that the inner surface topography is related to the polymer molecular variables, rheological properties and extrusion processing conditions. Surface energy analysis of these surfaces has also been shown to be related to polymer type as well as surface roughness.

THERMAL ANALYSIS AND RHEOLOGICAL STUDIES ON THERMOPLASTIC URETHANES
Lecon Woo , William Anderson, May 2010

Thermoplastics urethanes (TPU) offer broad property range, processing flexibility, and biocompatibility for medical applications. We have undertaken a thermal and rheological study on thermal transitions which influence physical characteristics and oxidative degradation. In addition, possible effects from hydrolytic degradation with long term exposure to alcoholic solvents are sought. Techniques used include Thermal analysis and oxidative induction time (OIT) by differential scanning calorimetry (DSC), and melt rheology. It was found, for selected but not the majority of TPUs, OIT onsets were difficult to obtain. However, melt rheology, with proper sample conditioning, was capable in quantifying the hydrolytic molecular weight degradation process.h

NANOCOMPOSITES OF THERMOTROPIC LIQUID CRYSTAL POLYMER WITH CARBOXYLATED MULTI-WALL CARBON NANOTUBE
Seong Hun Kim , Hui Jun Choi, May 2010

Incorporation of multi wall carbon nanotube (CNT) into the thermotropic liquid crystal polymer matrix (TLCP) obtained high performance polymer nanocomposites. For fabrication of high performance polymer nanocomposites, major challenge is to improve the dispersion of CNT in the TLCP matrix and the interfacial adhesion between CNT and the TLCP matrix. In this study, Multi-wall carbon nanotube (MWCNT) reinforced TLCP nanocomposites were prepared by a melt compounding using twin-screw extruder. The CNT was functionalized with chemical surface modification to introduce carboxyl groups onto the surfaces of CNT for uniform dispersion and induce excellent interfacial adhesion. The rheological, mechanical, morphological, and thermal properties of TLCP/CNT nanocomposites were investigated.

AN IN SITU STRUCTURING RHEOMETER BASED ON CHAOTIC ADVECTION
S. Ramaswami , D. A. Zumbrunnen , G. M. Harrison, May 2010

An in situ structuring rheometer (ISSR) has been developed that allows simultaneous controlled formation of structure in polymer blends and composites and measurements of rheological properties. Multi-layer, interpenetrating, and platelet polymer blend morphologies are examples of structure types producible. Networks among solid particles and dispersions can also be formed.The ISSR is modular for installation into existing rheometer platforms. In situ structuring in the melt occurs by chaotic advection which recursively stretches and folds melt domains. Characteristic structure sizes in the melt can reduce to nano-scales so the ISSR also has application to nanocomposites.

ANOMALOUS RHEOLOGICAL PROPERTIES FOR BINARY BLENDS OF LINEAR POLYETHYLENE AND LONG-CHAIN BRANCHED POLYETHYLENE
Naoya Mieda , Kenzo Okamoto , Masayuki Yamaguchi, May 2010

The rheological properties for the binary blends composed of a linear polyethylene and a branched polyethylene (LDPE) are studied. It is found that some blends show enhanced oscillatory shear moduli than the individual pure components, suggesting that the relaxation mechanism with long characteristic time is generated in a molten state. Further, they show higher zero-shear viscosities. The drawdown force, defined as the force needed for the extension of a polymer melt from a capillary rheometer, is also evaluated to comprehend the rheological information under the elongational flows and found to be quite sensitive to the anomalous behavior. Furthermore, it is found that the blends show marked flow instability, because they have longer relaxation time than the pure components.

IN SITU PRODUCTION OF SLIGHTLY BRANCHED POLY(ETHYLENE TEREPHTHALATE) BY SOLID-STATE SHEAR PULVERIZATION: A POTENTIAL SOLUTION TO IMPROVED RECYCLABILITY AND SUSTAINABILITY
Cynthia Pierre , John M. Torkelson, May 2010

Using solid-state shear pulverization (SSSP) to process poly(ethylene terephthalate) (PET) without addition of chemical agents, we demonstrate that linear PET can be transformed into lightly branched PET, with resulting improvements in physical and mechanical properties. Rheological characterization demonstrates an increase in the melt viscosity of the pulverized PET while intrinsic viscosity characterization yields data consistent with no increase in linear chain length. These results indicate that branching occurs in situ during SSSP via mechanochemistry involving the production of polymeric radicals that result from low levels of chain scission accompanying SSSP. A hypothetical mechanism for this mechanochemical transformation is discussed. The lightly branched PET resulting from SSSP yields a dramatic increase in the crystallization rate of the PET, improving its processability. The ability to increase the melt viscosity of PET by SSSP may contribute to sustainable engineering of PET; a long-standing issue with recycling PET for high-value applications is the fact that melt processingof PET results in reduction of molecular weight and thereby melt viscosity, making the recycled material often unusable for the original application for which it was made.

DEVELOPMENT OF PLASTIC DENTAL BRACKETS BY MICROINJECTION: MECHANICAL AND RHEOLOGICAL SIMULATION, PROTOTYPES PRODUCTION BY MICROMILLING AND PRODUCTION BY MICROINJECTION
S. Azcarate , A. Herrero , J. Esmoris , R. Oñate , A. Cervera, May 2010

Although plastic dental brackets are available on the market, they are all made out of plastic materials with poor mechanical properties. This project sought to develop plastic dental brackets with better mechanical properties than the metallic ones in order to enlarge the aesthetic treatment market. The project started by selecting the material, PSU from BASF, and then focused on prototype production by direct micro milling in order to check the design and mechanical properties experimentally. Once the design was tuned, rheological simulation took place to be produced by microinjection. A first micro mould was produced to check microinjection feasibility. The remaining micro moulds were produced and the first production series obtained. The product was patented and launched on the market.

INVESTIGATION OF THE CORRELATION BETWEEN THERMO-MECHANICAL PROPERTIES AND PERCOLATION THRESHOLD IN CARBON FILLED POLYPROPYLENE NANOCOMPOSITES
Chun Chu, Kyriaki Kalaitzidou, May 2010

This study aims to investigate possible correlation between thermo-mechanical properties and percolation threshold in carbon filled polypropylene nanocomposites. The goal is to identify an indirect way to determine the percolation threshold without the need to measure the electrical conductivity of a plethora of specimens which is a cumbersome task. The percolation threshold is the basic required feedback of all the existing theoretical models that describe the electrical conductivity of composites materials and are used as design tools. Polypropylene is used as the polymer and exfoliated graphite nanoplatelets, carbon black and vapor grown carbon fibers are used as fillers. Electrical conductivity and rheological properties of PNCs are characterized as a function of fillerƒ??s concentration. The need of accurately determining the percolation threshold is demonstrated by comparing the electrical conductivity data to the predictions of the modified Mamunya model for all three systems studied.

PROCESSING AND CHARACTERIZATION OF PEEK/MWNT NANOCOMPOSITES PREPARED BY HIGH POWER ULTRASONIC WAVES
Rishi Kumar, Avraam I. Isayev, Todd Lewis, May 2010

A single screw extruder having ultrasonic barrel attachment was used to manufacture polyetheretherketone (PEEK) - multi walled carbon nanotubes (MWNT) nanocomposites with enhanced dispersion of carbon nanotubes (CNTs) in polymer matrix. The effect of ultrasonic amplitude and CNTs loading on die pressure, electrical conductivity, rheological, morphological and mechanical properties of PEEK filled with 1-10 wt% MWNT was studied. The die pressure was observed to decrease with the increase of ultrasonic amplitude and increased with the increase of CNTs loading. The electrical percolation threshold was found to be between 1 and 2 wt% loading of CNTs.

PETI-330 / MWNT NANOCOMPOSITES COMPOUNDED BY ULTRASONICALLY ASSISTED EXTRUSION
Jose M. Perez, Jr., May 2010

A continuous, commercially viable method for the dispersion of multi walled carbon nanotubes (MWNTs) in polymer matrices using an ultrasonically assisted twin screw extruder has been studied. The effects of ultrasound on die pressure, power consumption, rheological, morphological, mechanical and electrical properties in PETI-330 nanocomposites filled with 0-5 wt. % MWNTs have been evaluated. Ultrasonically treated nanocomposites show increased viscosity with a slight improvement in mechanical properties at various loadings and ultrasonic treatment. An electrical percolation of less than 0.5 wt. % was observed.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net