PlastChicks™ 101

Nylon

Class Description (Click to read more.)

TBA

Previous: PET

Next: POM

Lessons

0	Class Trailer	0:30
1	Injection Molding	20:00
2	Extrusion	20:00
3	Blow Molding (in all its versions)	20:00
4	Rotation Molding	20:00
5	Thermoforming	20:00
6	Additive Manufacturing	20:00
7	Amorphous/Semi-Crystalline Break Down	20:00
8	Polystyrene	20:00
9	PMMA	20:00
10	ABS	20:00
11	PVC	20:00
12	PC	20:00
13	PE	20:00
14	PP	20:00
15	PET	20:00
	Nylon	20:00
17	POM	20:00

Kim McLoughlin
Senior Research Engineer, Global Materials Science
Braskem

A Resin Supplier’s Perspective on Partnerships for the Circular Economy

About the Speaker

Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.

Gamini Mendis, Ph.D.
Assistant Professor, Plastics Engineering Technology
Penn State Erie, The Behrend College

A Resin Supplier’s Perspective on Partnerships for the Circular Economy

About the Speaker

Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.

Tom Giovannetti
Technical Service Engineer, Injection and Rotational Molding and CAE
Chevron Phillips Chemcial Company

A Resin Supplier’s Perspective on Partnerships for the Circular Economy

About the Speaker

Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.

Joseph Lawrence, Ph.D.
Senior Director and Research Professor
University of Toledo

A Resin Supplier’s Perspective on Partnerships for the Circular Economy

About the Speaker

Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.

Matt Hammernik
Northeast Account Manager
Hasco America

A Resin Supplier’s Perspective on Partnerships for the Circular Economy

About the Speaker

Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.

SPE-Inspiring Plastics Professionals

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.