Thursday, March 30, 2023

Go To …

This year we are offering a program based on four themes. Each theme has several sessions per day. Themes are designated by the following colors:

Advances in Materials and Characterization

Sustainability

Polymer Processing and Equipment

Digitalization and Additive ManufacturingSponsored by

Themes

Advances in Materials and Characterization

Sustainability

Polymer Processing and Equipment I

Digitalization and Additive Manufacturing Sponsored by

All Times are in Mountain Daylight Savings Time.

Session
Tracks

Moderators

Applied rheology

Qian Qin

Additives and Compatibilizers for Recycling

Sahitya Movva

Injection Molding II

David Okonski

Additive Manufacturing/ 3D Printing II

Paul Martin

08:00 AM

Steady State and Dynamic Oscillatory Shear Properties of Carbon Black Filled Elastomers

Avraam Isayev, Ph.D.
Distinguished Professor Emeritus
University of Akron

Room:
Denver 1-3

Applied Rheology

Film Recyclability Study Using a Micro Blown Film Line

Jin Wang, Ph.D.
Senior Research Scientist
Dow

Room:
Denver 4-6

Additives and
Compatibilizers
for Recycling

Compensation of Batch Fluctuations of Post-Consumer Recyclate in Injection Molding by Phase-Unifying Process Control

Katharina Hornberg
Research Assistant
IKV - RWTH Aachen University

Room:
Colorado G-J

Injection Molding II

Structure Development of Semi-Crystalline Polymers in Laser Based Powder Bed Fusion

Simon Cholewa
Scientific Assistant
Institute of Polymer Technology Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

08:30 AM

Introducing a Differentiable, Shear-Thinning Viscosity Model

Paul Van Huffel
Senior Applications Engineer
Altair Engineering

Room:
Denver 1-3

Applied Rheology

Reactive Extrusion for Upcycling Post-Consumer Polypropylene and Its Use as a Compatibilizing Agent

Olivia Ferki
Research Assistant
University of Massachusetts Lowell

Room:
Denver 4-6

Additives and
Compatibilizers
for Recycling

Injection Velocity Versus Pressure Control During Filling

Bradley Johnson
Professor
Penn State Erie, The Behrend College

Room:
Colorado G-J

Injection Molding II

Powder Bed Fusion of Polymer-Based Separators for Solid-State Batteries

Katrin Wudy, Ph.D.
Professor
Technical University of Munich Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

09:00 AM

Experimental Characterization and Modelling of the Pressure Dependence of the Viscosity for Injection Molding Simulations

Steffen Verwaayen
Research Assistant
IKV - RWTH Aachen University

Room:
Denver 1-3

Applied Rheology

Novel Compatibilization Solution for PE/PA or EVOH

MiaoMiao Xiao
Research Scientist
Ingenia Polymers Corp

Room:
Denver 4-6

Additives and
Compatibilizers for
Recycling

A Novel Approach to Control Switchover Between Injection and Holding Phase for a Hydraulic Injection Moulding Machine

Rasmus Hertz
Ph.D. Student
LEGO System A/S and Aalborg University

Room:
Colorado G-J

Injection Molding II

3-D Printing of Thermoplastic Polyurethane Foams using Thermally Expandable Microspheres

Aboutaleb Ameli
Assistant Professor
UMass Lowell Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

09:30 AM

Coffee Break

10:00 AM

Using Thermal and Rheological Techniques to Help Guide Recycled PET Extrusion Processing

Tianhong Chen, Ph.D.
Principal Assistant Professor
TA Instruments - Waters LLC

Room:
Denver 1-3

Applied Rheology

Novel Approach to Increase Sustainability Rates for PET Compounds

Yuzhen Yang
Technical & Market Development Manager
Kaneka North Americas

Room:
Denver 4-6

Additives and
Compatibilizers
for Recycling

Identification and Compensation of Part Warpage in Injection Molding Using On-Cavity Thermally Sprayed Heating Coatings

Cemi Kahve
Research Assistant
IKV - RWTH Aachen University

Room:
Colorado G-J

Injection Molding II

Compressive Behavior of Additively Manufactured Elastomeric Thermoplastic Polyurethane Honeycomb Structures With 2D Density Gradients

Mohammad Ahmed
Assistant Professor
Southeastern Louisiana University Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

10:30 AM

Exploiting Structure-Process Property Relationships of Branched Polycarbonates for Industrial Applications

Manojkumar Chellamuthu, Ph.D.
Lead Scientist
Sabic Specialties

Room:
Denver 1-3

Applied Rheology

Modeling the Single-Screw Extruder by Means of CFD-DEM Considering Plastics Melting

Alptekin Celik
Research Associate
IKT - University of Stuttgart

SPEAKER UNABLE TO ATTEND

Room:
Denver 4-6

Additives and
Compatibilizers for
Recycling

Ensuring Quality of Moulded Elements by Accessing Material and Process Variations

Wendi Wang
Moulding Technology Manager
LEGO System A/S

Kelly Cristina Briceño
Materials Engineer
LEGO System A/S

Room:
Colorado G-J

Injection Molding II

Comparison of the Anisotropy of the Mechanical Properties of Injection Moulded and Additively Manufactured Parts

Johannes Austermann
Graduate Research Assistant
IKV - RWTH Aachen University Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

11:00 AM

Confinement and Complex Viscosity

Steacy Coombs
Graduate Student
Queen's University

Room:
Denver 1-3

Applied Rheology

Effect of Reactive and Non-Reactive Coupling Agents on Mechanical Properties of Recycled Polyethylene Terephthalate Filled With Ground Tire Powder

Aboulfazl Barati
Postdoctoral Researcher
Troy University

Room:
Denver 4-6

Additives and
Compatibilizers for
Recycling

The Universal Process: A Novel Approach to Enable Injection Molded Part(s) to Generate a Singular Process Across Multiple Machines and Materials

Lexington Peterson
Field Process Engineer
iMFLUX

Room:
Colorado G-J

Injection Molding II

Effective Wall Thickness for Computational Modeling of Polymer Extrusion Additive Manufacturing

Saratchandra Kundurthi
Ph.D. Student
Michigan State University Sponsored by

Room:
Penrose 1

Additive
Manufacturing/
3D Printing II

Thursday, March 30, 2023

Thursday, March 30, 2023

Go To …

Steady State and Dynamic Oscillatory Shear Properties of Carbon Black Filled Elastomers

Film Recyclability Study Using a Micro Blown Film Line

Compensation of Batch Fluctuations of Post-Consumer Recyclate in Injection Molding by Phase-Unifying Process Control

Structure Development of Semi-Crystalline Polymers in Laser Based Powder Bed Fusion

Introducing a Differentiable, Shear-Thinning Viscosity Model

Reactive Extrusion for Upcycling Post-Consumer Polypropylene and Its Use as a Compatibilizing Agent

Injection Velocity Versus Pressure Control During Filling

Powder Bed Fusion of Polymer-Based Separators for Solid-State Batteries

Experimental Characterization and Modelling of the Pressure Dependence of the Viscosity for Injection Molding Simulations

Novel Compatibilization Solution for PE/PA or EVOH

A Novel Approach to Control Switchover Between Injection and Holding Phase for a Hydraulic Injection Moulding Machine

3-D Printing of Thermoplastic Polyurethane Foams using Thermally Expandable Microspheres

Using Thermal and Rheological Techniques to Help Guide Recycled PET Extrusion Processing

Novel Approach to Increase Sustainability Rates for PET Compounds

Identification and Compensation of Part Warpage in Injection Molding Using On-Cavity Thermally Sprayed Heating Coatings

Compressive Behavior of Additively Manufactured Elastomeric Thermoplastic Polyurethane Honeycomb Structures With 2D Density Gradients

Exploiting Structure-Process Property Relationships of Branched Polycarbonates for Industrial Applications

Modeling the Single-Screw Extruder by Means of CFD-DEM Considering Plastics Melting

Ensuring Quality of Moulded Elements by Accessing Material and Process Variations

Comparison of the Anisotropy of the Mechanical Properties of Injection Moulded and Additively Manufactured Parts

Confinement and Complex Viscosity

Effect of Reactive and Non-Reactive Coupling Agents on Mechanical Properties of Recycled Polyethylene Terephthalate Filled With Ground Tire Powder

The Universal Process: A Novel Approach to Enable Injection Molded Part(s) to Generate a Singular Process Across Multiple Machines and Materials

Effective Wall Thickness for Computational Modeling of Polymer Extrusion Additive Manufacturing

Links

Locations

Powered By SPE