SPE ANTEC® 2022

ANTEC® 2022 Technical Program - Day 3 - June 16, 2022


Go To...

The tentative schedule for in-person ANTEC® 2022 is as follows:

Schedule - Day 3 — June, 16, 2022

8:00 AM – 12:00 PM ANTEC® Sessions Go to…
12:00 PM Adjourn Go to…
8:00 AM – 8:30 AM
Natalie Duprez
Ph.D. Student
Georgia Institute of Technology
Huaguang Yang
Research Associate
University of Wisconsin-Madison
Karun Kalia
Graduate Student
UMass Lowell
  • Fabrication of Expandable Filaments Towards In-Situ Foam 3D Printing of Microcellular Poly(lactic Acid)
    Additive Manufacturing/
    3D Printing

    Room E220ABC
  • View Abstract & Speaker Information >
8:30 AM – 9:00 AM
Vitasta Jain
Graduate Research Assistant
Clemson University
Joshua Krantz
Student
UMass Lowell
David Kazmer, Ph.D.
Professor
UMASS Lowell
9:00 AM – 9:30 AM
Rajendra Krishnaswamy
Vice President, Polymers R&D
CJ Bio
  • Impact Modification of PLA (Poly Lactic Acid) by Blending Small Amounts of Amorphous PHA (Polyhydroxyalkanoate) Copolymers
    Bioplastics and
    Renewable Technologies

    Room E220F
  • View Abstract & Speaker Information >
Michael Werner
Research Associate
University of Applied Sciences Schmalkalden
Prabhat Krishnaswamy, Ph.D.
Sr. Research Leader
Engineering Mechanics Corporation of Columbus (Emc2)
  • Development of an Agile, Battlefield Additive Manufacturing Plant for Recycled Polyehtylene Terephthalate (rPET)
    Additive Manufacturing/
    3D Printing

    Room E220ABC
  • View Abstract & Speaker Information >
9:30 AM – 10:00 AM
Christopher Lewis
Associate Professor
Rochester Institute of Technology
Anatoliy Batmanov, Ph.D.
Research Associate
Gemeinnuetzige KIMW Forschungs-GmbH
Genevieve Palardy, Ph.D.
Assistant Professor
Louisiana State University
10:00 AM – 10:30 AM
Christopher Lewis
Associate Professor
Rochester Institute of Technology
Sean Kim, Ph.D.
Senior Development Engineer
Corning Inc.
Ruben Schlutter, Ph.D.
Faculty of Mechanical Engineering
Gemeinnuetzige KIMW Forschungs-GmbH
  • Improving Part Properties During Injection Molding With 3D Printed CO2Cooled Plastic Mold Inserts
    Additive Manufacturing/
    3D Printing

    Room E220ABC
  • View Abstract & Speaker Information >
10:30 AM – 11:00 AM
Samy Madbouly, Ph.D.
Assistant Professor
Penn State
  • Shape-Memory Polymers Based on Castor Oil and Lignin Sulphonate Synthesized from Waterborne Dispersion
    Bioplastics and
    Renewable Technologies

    Room E220F
  • View Abstract & Speaker Information >
Bradley Johnson
Professor
Penn State Erie, The Behrend College
Gaurav Vadlamudi
Advanced Concepts Engineer
Instaversal
11:00 AM – 11:30 AM
Kavan Sheth
Graduate Research Assistant
Clemson University
Lih-Sheng Turng, Ph.D.
Professor
Wisconsin Institute for Discovery
Joshua Voll, Ph.D.
Research Associate
Hochschule Schmalkalden
  • Potential of Five-Axis Kinematic Systems for Additive Manufacturing Using Fused Deposition Modelling (FDM)
    Additive Manufacturing/
    3D Printing

    Room E220ABC
  • View Abstract & Speaker Information >
11:30 AM – 12:00 PM
James Sternberg
Senior Scientist
Clemson Composites Center
  • From Petroleum to Biobased Crude: A Thermoplastic Polyurethane From Lignin-oil Without Isocyanates
    Bioplastics and
    Renewable Technologies

    Room E220F
  • View Abstract & Speaker Information >
Lih-Sheng Turng, Ph.D.
Professor
Wisconsin Institute for Discovery
Yimin Yao
Ph.D Student
Virginia Tech
  • Investigating the Processing of Stimuli-Responsive Cellulose Nanocrystal Polymer Composites In Graded 3D Printing
    Additive Manufacturing/
    3D Printing

    Room E220ABC
  • View Abstract & Speaker Information >
12:00 PM — ANTEC® Adjourn
12:00 PM – 2:00 PM

SPE Applied Rheology Division Board Meeting

All SPE Members welcome.

Go To...


This educational program is provided as a service of SPE. The views and opinions expressed on this or any SPE educational program are those of the Speaker(s) and/or the persons appearing with the Speaker(s) and do not necessarily reflect the views and opinions of Society of Plastics Engineers, Inc. (SPE) or its officials, employees or designees. To comment or to present an opposing or supporting opinion, please contact us at info@4SPE.org.

Refund Policy for Events

Refunds will be granted up to June 1. Registration may not be transferred.

Copyright & Permission to Use

SPE may take photographs and audio/video recordings during the conference, pre-conference meetings and receptions that may include attendees within sessions, networking areas, exhibition areas, and other areas associated with the conference both inside and outside of the venue. By registering for this event, all attendees are providing permission for SPE to use this material at its discretion on SPE's websites, marketing materials, and publications. SPE retains ownership of copyright to all photographs and audio/video recording obtained at this event and attendees may request copies of any material in which they are included.




spe2018logov4.png
  Welcome Page

Travel Information

Show Hours and Hotels

Dining and Entertainment

Event Sponsors