The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Guangbiao Xu, Shengbin Cao, Hua Shen, Xiaofei Yan,
April 2018
Direct fiber feeding injection molding is an effective way of improving the mechanical properties of polymer/short fiber composites by enhancing the fiber length.
Simulations of the injection-molding process for long-fiber-reinforced thermoplastics enable the prediction of complex fiber behavior and can therefore be used to investigate the effect of screw type.
Sandro C. Amico, Natalia P. Lorandi, Heitor L. Ornaghi Jr, Jose Humberto S. Almeida Jr,
March 2018
Investigation of carbon-fiber-reinforced epoxy laminates shows that their viscoelastic behavior depends on both fiber orientation and creep performance.
Ines Kuhnert, Jason L. Williams, Alicyn M. Rhoades , Rene Androsch, Katalee Jariyavidyanont, Walter Focke,
March 2018
Calculating different cooling rates for injection-molded polyamide 11 enables successful prediction of crystal polymorph details in actual molded parts.
Organo-modified magnetic nanoparticles can be evenly dispersed within a fluoropolymer matrix by melt compounding for the development of transparent, heat-resistant, flexible nanocomposite films.
Erdener Karadag, Dursun Saraydin , Yasemin Isikver,
March 2018
The crosslinker used in the preparation of a poly(hydroxamic acid) hydrogel has a greater effect on its dye-sorbent properties (i.e., the removal efficiency) than does the type of dye.
Polyethersulfone modified by UV-induced grafting and then combined with poly(trimethoxysilyl)propyl methacrylate results in a hybrid material suitable for heat-resistant applications in homes and industries.
Alex Otavio Sanches, Jose Antonio Malmonge, Haroldo Naoyuki Nagashima, Paulo Vinicius Rebeque, Michael Jones Silva , Darcy Hiroe Fujii Kanda,
February 2018
Incorporation of carbon black nanofillers into castor oil polyurethane improves the electrical conductivity of the materials, through a thermally activated process.
Polymer nanocomposite papers produced through a novel approach exhibit high flexibility, improved thermal stability, and easy processability, and can thus be used in a variety of technical applications.
N'guadi Blaise Allou , Rajib Lochan Goswamee,
January 2018
The viscoelastic properties and stability of hybrid gels, synthesized via in situ polymerization, are improved upon addition of magnesium-aluminum layered double hydroxide.
Novel injection molding technology can reduce the level of fiber breakage during processing and the degree of fiber alignment along the flow direction.
The viscoelastic behavior of polymer melt is a significant factor during rheological characterization and should be taken into account during analysis and viscosity modeling.
Guilherme M. O. Barra, Bluma G. Soares, Silvia D.A.S. Ramoa, Tairan F. da Cunha, Alessandro Pegoretti, Patricia Cristine Vargas, Claudia Merlini,
January 2018
The electromagnetic interference shielding effectiveness of polymer composites filled with nanostructured carbon materials depends on electrical conductivity, morphology, aspect ratio, and filler dispersion.
Anson W. K. Ma, Huseini S. Patanwala,
December 2017
A dimensionless volumetric flow rate is found to be a critical parameter for understanding the microstructure and subsequent mechanical properties of 3D-printed composites.
Experiments reveal that acetone absorption induces crystallinity in polycarbonate and that the irradiated samples exhibit enhanced solvent crystallization.
Carbon aerogels are lightweight, mesoporus, solid-state materials that can be used to reinforce composites and to enhance their thermal and mechanical properties.
This educational program is provided as a service of SPE. The views and opinions expressed on this or any SPE educational program are those of the Speaker(s) and/or the persons appearing with the Speaker(s) and do not necessarily reflect the views and opinions of the Society of Plastics Engineers, Inc. (SPE) or its officials, employees or designees. To comment or to present an opposing or supporting opinion, please contact us at info@4SPE.org.
Copyright & Permission to Use
When you enter a SPE, a division of PLASTICS event or program, you enter an area where photography, audio, and video recording may occur. By entering the event premises, you consent to interview(s), photography, audio recording, video recording and its/their release, publication, exhibition, or reproduction to be used for news, webcasts, promotional purposes, telecasts, advertising, inclusion on websites, social media, or any other purpose by SPE and their affiliates and representatives. Images, photos and/or videos may be used to promote similar events in the future, highlight the event and exhibit the capabilities of SPE. You release SPE, their officers and employees, and each and all persons involved from any liability connected with the taking, recording, digitizing, or publication and use of interviews, photographs, computer images, video and/or or sound recordings. By entering the event premises, you waive all rights you may have to any claims for payment or royalties in connection with any use, exhibition, streaming, web casting, televising, or other publication of these materials, regardless of the purpose or sponsoring of such use, exhibiting, broadcasting, web casting, or other publication irrespective of whether a fee for admission or sponsorship is charged. You also waive any right to inspect or approve any photo, video, or audio recording taken by SPE or the person or entity designated to do so by SPE. You have been fully informed of your consent, waiver of liability, and release before entering the event.
Anti-Trust Statement
No discussion among members, volunteers, or staff, which attempts to arrive at any agreement regarding prices, terms or conditions of sale, distribution, volume, territories, or customers;
No activity or communication which might be construed as an attempt to prevent any person or business entity from gaining access to any market or customer for goods or services or any business entity from obtaining services or a supply of goods;
No activity or communication which might be construed as an agreement to refrain from purchasing or using any materials, equipment, services or supplies of or from any supplier; or
No other activity which violates anti-trust or applicable laws aimed at preventing unfair competition.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
This site uses cookies to recognize members so as to provide the benefits of membership. We may also use cookies to understand in general how people use and visit this site. Please indicate your acceptance to the right. Learn More..