| Member |
Division |
Section |
Year |
| Abbot, Ted |
Thermoset |
Ontario |
1997 |
| Allen, John D. |
Mold Making & Mold Design |
Cleveland |
2002 |
| Andersen, Paul, Dr. |
Extrusion |
Palisades-New Jersey |
2015 |
| Andre, Norm |
Thermoset |
Chicago |
1999 |
| Anton, Stanley J. |
President's Cup |
|
1994 |
| Anzini, David J. |
Extrusion Division |
Carolinas |
2022 |
| Arduini, Alan J. |
Marketing & Management |
Central Indiana |
2005 |
| Arendt, William D. |
Vinyl Plastics |
Chicago |
1997 |
| Arndt, R. David |
Automotive |
Detroit |
2002 |
| Arnold-Feret, Barbara |
Product Design & Development |
North Texas |
2003 |
| Aubrey, Barry T. |
Rotational Molding |
Miami Valley |
2007 |
| Bachman, Bonnie |
Engineering Properties & Structure |
South Florida |
2001 |
| Balthazar, Earl W., III |
Color & Appearance |
North Texas |
2011 |
| Barger, Mark |
Blow Molding |
Mid-Michigan |
2012 |
| Barnes, Ralph E. |
Injection Molding |
Rochester |
2006 |
| Barth, Frank J. |
Thermoforming |
Quebec |
1997 |
| Barto, Charles A. |
Injection Molding |
Lehigh Valley |
1995 |
| Bassett III, William |
Polymer Modifiers & Additives |
South Texas |
2003 |
| Basso, Helen |
Injection Molding |
Western Michigan |
2012 |
| Batiuk, Martin |
Extrusion |
Cleveland |
1995 |
| Baumann, Margaret H. |
Marketing & Management |
Newark |
1994 |
| Bayley, Dennis |
Polymer Modifiers & Additives |
Ontario |
2000 |
| Beall, Glenn L. |
Rotational Molding |
Chicago |
2005 |
| Beard, Robert A. |
Injection Molding |
Chicago |
2009 |
| Beatty, Charles L. (D) |
Engineering Properties & Structure |
Central Florida |
2005 |
| Bennett, Joe (D) |
Injection Molding |
Carolinas |
1994 |
| Bennyhoff, Bonnie |
Automotive |
Detroit |
2005 |
| Berard, Mark T., Dr. |
Vinyl Plastics |
Gulf South Central |
2009 |
| Bernacki, John |
Composites |
Rochester |
2006 |
| Bernhardt, Anne |
Product Design & Development |
North Texas |
2006 |
| Biggs, Suzanne |
Marketing & Management |
South Texas |
2006 |
| Blackwell, L.D. |
Extrusion |
South Texas |
2006 |
| Bloom, Edward S. |
Plastics Recycling |
Philadelphia |
1993 |
| Bowland, Creig |
Composites |
Detroit |
2013 |
| Bradley, Richard |
Vinyl Plastics |
Palisades |
2001 |
| Braney, Ken J. |
European Thermoforming |
UK/Ireland |
2011 |
| Brax, Harri J. |
Marketing & Management |
Carolinas |
2002 |
| Bristol, Gail R. |
President's Cup |
Connecticut |
2008 |
| Britton, James E. |
Automotive |
Detroit |
1996 |
| Broome, Russell C. |
Marketing & Management |
Piedmont Coastal |
2009 |
| Brosius, Dale |
Thermoset |
Detroit |
2009 |
| Browitt, Terence (D) |
Marketing & Management |
Quebec |
1998 |
| Buckleitner, Eric L. (D) |
Moldmaking/Mold Design |
Western Michigan |
1993 |
| Buckley, Daniel T. |
Advanced Polymer Composites |
Hudson-Mohawk |
1994 |
| Buja, Frederick J. (D) |
Mold Making & Mold Design |
Rochester |
2006 |
| Burnett, Robert H. |
Vinyl Plastics |
Virginia |
2005 |
| Bush, Ray J. |
Vinyl Plastics |
UK/Ireland |
2002 |
| Cameron, Dick |
Marketing & Management |
Pittsburgh |
2005 |
| Cameron, Joe |
Color & Appearance |
Upper Midwest |
2003 |
| Campbell, Gregory A., Dr. |
Extrusion |
Detroit |
2011 |
| Cangelosi, Frank, Dr. |
Polymer Modifiers & Additives |
Connecticut |
2009 |
| Cappelletti, Michael (D) |
President's Cup |
Connecticut |
2001 |
| Carlin, Conor P. |
Recycling, Thermoforming |
President's Cup |
2021 |
| Carlson, Charles (D) |
Injection Molding |
Western Michigan |
1995 |
| Carmagnola, Ernest D. |
Automotive |
New York |
1995 |
| Carow, R. Steven |
Thermoset |
Piedmont Coastal |
1999 |
| Casey, William J. |
Vinyl Plastics |
Palisades |
1993 |
| Charvat, Robert |
Color & Appearance |
Cleveland |
1994 |
| Chatterjee, Ananda M. (D) |
Thermoplastic Materials & Foams |
South Texas |
2005 |
| Christensen, Ralph |
Extrusion |
South Texas |
1998 |
| Claypoole, Homer 'Jack' |
Injection Molding |
Chicago |
1999 |
| Coaker, A. William |
Vinyl Plastics |
Cleveland |
2003 |
| Coel, Joe (D) |
Mold Making & Mold Design |
Milwaukee |
2002 |
| Cole, Suzanne |
Automotive |
Detroit |
2006 |
| Coleman, Ernest A. (D) |
Polymer Modifiers & Additives |
Connecticut |
2005 |
| Connolly, Michael |
Composites |
Detroit |
2013 |
| Copp, John E. |
Color & Appearance |
Mid Michigan |
1997 |
| Cotten, Frank |
Injection Molding |
Piedmont Coastal |
1995 |
| Cowell, Richard D. |
Composites/Polymer Mod. & Add. |
Newark |
2005 |
| Cowgill, Paul W. |
Injection Molding |
Piedmont Coastal |
1994 |
| Cramer, Robert E. (D) |
President's Cup |
|
1999 |
| Cressy, Terrence Q. (D) |
Automotive |
Detroit |
2002 |
| Cude, J. Michael (D) |
Medical Plastics |
Tennessee Valley |
2004 |
| Cunningham, James H. |
Plastics Recycling |
Carolinas |
1994 |
| Cutroni, Frank J. |
Injection Molding |
South Florida |
1994 |
| Czuba, Len |
Medical Plastics |
Chicago |
2000 |
| Dahl, Kenneth (D) |
Injection Molding |
Chicago |
1992 |
| Davis, Charles C |
Engineering, Properties & Struct. |
Mid-Michigan |
1996 |
| Davis, Donna |
Thermoplastic Materials & Foams |
South Texas |
1999 |
| Davis, Sandra P. |
Color & Appearance |
Philadelphia |
2008 |
| Day, Gary A. |
Injection Molding |
Western Michigan |
1997 |
| De Craene, Jacques (D) |
-- |
Benelux |
1993 |
| De Vos, Wim |
President's Cup |
|
2015 |
| Dealey, Robert W. |
Moldmaking/Mold Design |
Milwaukee |
1994 |
| Dean, Anthony F., Jr. |
Extrusion |
Akron |
2006 |
| Deans, Frederick |
Automotive |
Northwestern PA |
2003 |
| DeBoo, Robert V. |
Extrusion |
Southern |
1994 |
| Dieckmann, Dale |
Polymer Modifiers & Additives |
Kansas City |
2000 |
| Diecks, William A. |
Marketing & Management |
South Texas |
2002 |
| Drieskens, Gerald |
Injection Molding |
Benelux |
1998 |
| Driscoll, Stephen Burke |
Engineering Properties & Struct. |
Eastern New England |
1997 |
| Drusda, Jeffrey S. |
Color & Appearance |
|
2024 |
| Duska, Joseph J. |
Extrusion |
Palisades/New Jersey |
2011 |
| Duvall, Donald |
Plastics Pipe & Fitting |
Chicago |
2017 |
| Edward, James M. |
Extrusion |
Quebec |
1996 |
| Ehr, Sharon M. |
Color & Appearance |
Western Michigan |
2010 |
| Ehrig, Raymond J. |
President's Cup |
|
1993 |
| Eichen, Laurence M. (D) |
Injection Molding |
Baltimore-Washington |
1996 |
| El-Hibri, Jamal |
Engineering Properties & Structure |
Southern |
2008 |
| Erickson, David R. |
Injection Molding |
Upper Midwest |
1999 |
| Exner, William E. |
Thermoset |
Chicago |
1992 |
| Farren, Peter J. |
Extrusion |
UK/Ireland |
2007 |
| Fasano, Frank L (D) |
Color & Appearance |
South Florida |
1998 |
| Ferguson, Lewis (D) |
Blow Molding |
Philadelphia |
2012 |
| Figaniak, James M. |
Color & Appearance |
Philadelphia |
2025 |
| Fina, Paul E. |
Thermoset |
Chicago |
1995 |
| Fischer, Jerry M. |
Mold Making & Mold Design |
Oklahoma |
2009 |
| Forger, Robert D. (D) |
President's Cup |
Connecticut |
1992 |
| Fountas, Nicholas G. |
Injection Molding |
Pioneer Valley |
2005 |
| Fowler, Norman E. |
Marketing & Management |
Rochester |
1996 |
| Frankland, James D. Jr. |
Extrusion |
Pittsburgh |
2007 |
| Fuggiti, Henry A |
Injection Molding |
Delaware Valley |
1993 |
| Gardiner, Jay L. (D) |
Mold Making & Mold Design |
New York |
2007 |
| Garrett, David W. |
Composites |
Southern |
2002 |
| Gately, Philip M. |
Extrusion |
SE New England |
1995 |
| Gedemer, Thomas J. |
President's Cup |
|
1990 |
| Genet, Barbara |
Decorating & Assembly |
New York |
1995 |
| Glatt, Edward W."Skip" |
Mold Making & Mold Design |
Chicago |
1996 |
| Goettler, Lloyd A., Dr. |
Engineering Properties & Structure |
Akron |
2008 |
| Goin, Celia |
Polymer Modifiers & Additives |
Virginia |
1998 |
| Golding, Terry L. (D) |
Color & Appearance |
Upper Midwest |
2007 |
| Golmanavich, Jerry |
Injection Molding |
Nebraska |
2003 |
| Gomez, Jaime |
President's Cup |
|
2014 |
| Goodman, Donald |
Marketing & Management |
Palisades |
2000 |
| Grady, Brian |
Engineering Properties & Structure |
Oklahoma |
2016 |
| Graff, John R., Jr. (D) |
Color & Appearance |
Pittsburgh |
1993 |
| Gramann, Paul J., Dr. |
Failure Analysis & Prevention |
Milwaukee |
2022 |
| Grelle, Peter F. (D) |
Injection Molding |
Detroit |
2006 |
| Griep, John R. (D) |
Thermoforming |
Arizona (Pres. Cup) |
1998 |
| Griffing, James S. |
Composites |
Pacific Northwest |
2010 |
| Grossman, Richard F. |
Polymer Modifiers & Additives |
Palisades |
2005 |
| Grove, Dale A., Dr. |
Composites |
Ohio Firelands |
2008 |
| Gupta, Rakesh K., Dr |
Polymer Modifiers & Additives |
West Virginia & SE Ohio |
2014 |
| Haas, John F. |
Automotive |
Detroit |
2002 |
| Hall, Dave C. |
Injection Molding |
Rochester |
1998 |
| Hamel, Pierre (D) |
Extrusion |
Quebec |
2012 |
| Hanna, Margie |
Medical Plastics Division |
|
2025 |
| Hayford, Dennis L. |
Plastics Recycling |
Carolinas |
1992 |
| Heinke, Richard M. |
Injection Molding |
Nebraska |
1999 |
| Heitker, Mark |
Blow Molding |
South Texas |
2013 |
| Heitzman, Scott |
Color and Appearance |
|
2019 |
| Henneberry, Gary S. |
Blow Molding |
Philadelphia |
1994 |
| Henry, David T. |
Thermoplastic Materials & Foams |
South Texas |
2003 |
| Hermanson, Nancy J. |
Medical Plastics |
Mid-Michigan |
2002 |
| Hertlein, Wayne M. |
Mold Making & Mold Design |
Detroit |
2006 |
| Hill, Jack |
Thermoforming |
Milwaukee |
2004 |
| Hills, Robert G. (D) |
Extrusion |
Akron (Pres. Cup) |
1995 |
| Ho, Thoi (D) |
Polymer Modifers and Additives |
South Texas |
2013 |
| Hogan, Todd A. |
Extrusion |
Mid-Michigan |
2004 |
| Hollenbeck, Donald C. |
Injection Molding |
Philadelphia |
1993 |
| Hormozi, Hormoz |
Thermoplastic Materials & Foams |
Chicago |
2003 |
| Howell, Robert T. |
Injection Molding |
Kentuckiana |
1992 |
| Hull, John L. (D) |
Electrical & Electronic |
Philadelphia |
1993 |
| Humphrey, William A. |
Injection Molding |
New York |
1993 |
| Husti, Martin |
Extrusion |
South Texas |
1997 |
| Irwin, Chris |
Blow Molding |
Toledo |
1999 |
| Jackson, Robert R. |
Blow Molding |
Milwaukee |
2004 |
| Jambro, Donald J. |
Injection Molding |
Rochester |
1996 |
| Jana, Sadhan C., Prof. |
Engineering Properties & Structure and Composites |
Akron |
2014 |
| Janssen, Cor |
European Thermoforming |
Benelux |
2006 |
| Johnke, Klaus-Dieter |
Automotive |
Central Europe |
2005 |
| Johnson, Bradley G. |
Injection Molding |
Northwestern Pennsylvania |
2023 |
| Johnson, David N. |
Color & Appearance |
Ohio Firelands |
2008 |
| Johnson, Earle S. (D) |
Injection Molding |
Baltimore-Washington |
1993 |
| Johnson, Richard W., Dr. |
Vinyl Plastics |
Palisades |
2007 |
| Jonkers, G H |
Blow Molding |
Benelux |
1999 |
| Kaderbek, Charles J (D) |
Automotive |
Chicago |
1994 |
| Kakarala, S. Norm |
Automotive |
Detroit |
2003 |
| Kerouac, Kenneth A. |
Injection Molding |
Mid-Michigan |
2009 |
| Kilpatrick, Kenneth K. |
Thermoplastic Materials & Foams |
Carolinas |
1992 |
| Kipp, Roger C. |
Thermoforming |
Susquehanna |
2008 |
| Kloesel, Max W. |
Thermoplastic Materials & Foams |
South Texas |
2002 |
| Kotak, Vijay R. |
Vinyl Plastics |
Palisades |
2002 |
| Kozak, Michael |
Composites |
North Texas |
2001 |
| Kulkarni, Vaman |
Electrical & Electronic |
Carolinas |
2000 |
| Kumar, Ashok |
Automotive |
India |
1995 |
| Lambert, Mick |
Medical Plastics |
Southern |
2003 |
| Landes, Brian, Dr. |
Engineering Properties & Structure |
Mid-Michigan |
2015 |
| Lavach, Mark |
Vinyl Plastics Division |
Palisades-MidAtlantic |
2025 |
| Lee, Norman C. |
Blow Molding |
Carolinas |
2001 |
| Levine, Stuart (D) |
Injection Molding |
New York |
2004 |
| Lewallen, Lou |
Thermoplastic Materials & Foams |
Detroit |
1999 |
| Lewis, Randy |
Thermoset |
Caribbean |
1999 |
| Lipp, Peter |
Thermoset/Injection Molding |
Kentuckiana |
2004 |
| Longley, William V. |
Color & Appearance |
Detroit |
1996 |
| Lopez, Benjamin |
Blow Molding |
--- |
2017 |
| Loudin, Len L. (D) |
Vinyl Plastics |
Southern |
1994 |
| Lutton, C.D. "Chuck" |
Automotive |
Detroit |
1995 |
| Lyons, Jason |
SPE Board of Directors |
Philadelphia |
2025 |
| MacLean-Blevins, Mark T. |
Product Design & Development |
|
2020 |
| Martin, George C. |
Polymer Analysis |
Rochester |
2002 |
| Martinez, Riccardo A. |
Engineering Properties & Structure |
Mid-Hudson |
1992 |
| Marx, Fred M. |
Vinyl Plastics |
Southern |
1993 |
| Masciarelli, Alberico (D) |
Electrical & Electronic |
Eastern New England |
1993 |
| Mastrodonato, Richard N. |
Decorating & Assembly |
Rochester |
2007 |
| Mathis, Gwen S. |
Thermoforming |
Southern |
1992 |
| McAndrew, Francis B. |
Engineering Properties & Structure |
Palisades-New Jersey |
2009 |
| McClelland, Sandra |
President's Cup |
Detroit |
2013 |
| McGarry, J. J. (Jack) |
Blow Molding |
Carolinas |
1994 |
| McGovern, Al |
Product and Design and Development |
Chicago |
2025 |
| McMurrer, Mary C. (D) |
Polymer Modifiers & Additives |
Lehigh Valley |
1996 |
| McNamara, John F. |
Blow Molding |
Miami Valley |
1993 |
| McNamara, Tom |
Injection Molding |
Upper Midwest |
2012 |
| Meckley, Jonathon |
Blow Molding |
Northwestern PA |
2013 |
| Mehta, Kishor S. |
Injection Molding |
Pittsburgh |
1999 |
| Mendelsohn, Morris A. |
Electrical & Electronic |
Pittsburgh |
1993 |
| Merrill, Kenneth E. |
Injection Molding |
Kansas City |
2006 |
| Merrington, Adrian, Dr. |
Recycling |
Detroit Section |
2021 |
| Michel, Han P. |
Australia-New Zealand |
Australia-New Zealand |
2022 |
| Miller, Henry L. |
Plastics Analysis |
Western Michigan |
1993 |
| Miller, Richard J. |
Thermoset |
Western Michigan |
1993 |
| Miller, Thomas |
Automotive |
Detroit |
2014 |
| Moberg, Clifford |
Moldmaking & Mold Design |
Milwaukee |
2001 |
| Monte, Salvatore J. |
Thermoplastic Materials & Foams |
Palisades |
2003 |
| Moore, Jan R. |
Rotational Molding |
Carolinas |
2002 |
| Moore, John |
Injection Molding |
South Texas |
2006 |
| Moran, Michelle |
Medical Plastics |
Chicago |
2003 |
| Morey, William |
Decorating & Assembly |
Connecticut |
2013 |
| Morris, Barry |
Extrusion |
Philadelphia |
2025 |
| Morrison, Thomas F. |
Marketing & Management |
Pioneer Valley |
1997 |
| Moulinié, Pierre R. |
Medical Plastics |
Pittsburgh |
2024 |
| Mount, Eldridge M. |
Extrusion |
Rochester |
2004 |
| Mukhopadhyay, Prithu, Dr. |
Polymer Analysis |
Quebec |
2015 |
| Mulholland, Bruce M. |
Color & Appearance |
Miami Valley |
2006 |
| Murray, Allan D |
Automotive |
Detroit |
1993 |
| Muzzy, John D. |
Composites |
Southern |
2002 |
| Myers, Jo Anne |
Marketing & Management |
Newark |
1995 |
| Nelson, George E. |
Moldmaking & Mold Design |
Connecticut |
1993 |
| Nenadal, C.G. "Pete" |
Thermoset |
Cleveland |
1992 |
| Neward, Lance |
Product Design & Development |
Great Salt Lake |
2002 |
| Newman, Michael G. |
Injection Molding |
Ontario |
1999 |
| Norris, C.K. "Tony" |
Plastics Recycling |
Upper Midwest |
1996 |
| Northrop, Dennis C. |
Decorating & Assembly |
Detroit |
2007 |
| Nunn, Richard A. (D) |
Marketing & Management |
Connecticut |
1999 |
| Nunnaro, Ralph |
Color & Appearance |
Ontario |
2006 |
| O'Connell, William |
Polymer Modifiers & Additives |
Eastern New England |
2000 |
| Okamoto, Kelvin T. |
Thermoplastic Materials & Foams |
Chicago |
2005 |
| Okonski, David A. |
Injection Molding |
Detroit |
2024 |
| Owens, Scott E. |
President's Cup |
|
2012 |
| Pageau, Kevin |
Automotive |
Detroit |
2004 |
| Palermo, Joseph C. |
Automotive |
Detroit |
1999 |
| Palmer, Franklin D. |
Thermoforming |
Tennessee Valley |
1996 |
| Pape, Peter G. |
Polymer Modifiers & Additives |
Mid-Michigan |
2007 |
| Pauwels, Yetty |
Additives & Color and European Thermoforming |
Benelux |
1998 |
| Perdikoulias, John |
Extrusion |
Ontario |
2006 |
| Peters, Russell B., Jr. |
Extrusion |
Mid-Michigan |
2007 |
| Peters, Scott L. |
Mold Making & Mold Design |
Hong Kong |
2009 |
| Peterson, Lloyd A. |
Injection Molding |
Chicago |
1992 |
| Petrach, Robert V., Jr. |
Injection Molding |
Detroit |
2020 |
| Petrovic, Rudi R. |
Injection Molding |
Milwaukee |
2002 |
| Pham, Hoa |
Injection Molding |
Pittsburgh |
2010 |
| Pham, Hoang T. |
Engineering Properties & Structure |
South Texas |
2016 |
| Phillips, Tracy |
Color & Appearance |
Southern |
2012 |
| Pickett, Thomas J. |
Automotive |
Detroit |
2006 |
| Polemenakos, Steve C. |
Polymer Modifiers & Additives |
South Texas |
2004 |
| Portnoy, Robert C. |
Medical Plastics |
South Texas |
2002 |
| Poston, Irvin E. (D) |
Automotive |
Detroit |
2011 |
| Powers, Thomas E. |
Automotive |
Detroit |
2004 |
| Price, Ronald F. (D) |
Automotive |
Detroit |
2008 |
| Prokopyshen, Monica H.L. |
Automotive |
Detroit |
2009 |
| Puckerin, Elizabeth J. |
Color & Appearance |
|
2023 |
| Puvak, Ronald A. |
Blow Molding |
Pittsburgh |
2007 |
| Radosta, Joseph A., Jr. |
Polymer Modifiers & Additives |
Lehigh Valley |
1995 |
| Rajguru, Sharad R. |
Injection Molding |
Rochester |
1999 |
| Ramesh, Natarajan S. |
Thermoplastic Materials & Foams |
North Texas |
2010 |
| Rangos, Jr., George C. (D) |
Color & Appearance |
Ohio Firelands |
2002 |
| Rao, Nippani (D) |
Automotive |
Detroit |
2005 |
| Rathgeber, Juergen (D) |
Extrusion |
Chicago |
1995 |
| Rathman, John R. |
Blow Molding |
Bartlesville-Tulsa |
2005 |
| Ratzlaff, Jon |
Rotational Molding |
Bartlesville-Tulsa |
2006 |
| Reid, Austin H. |
Color & Appearance |
Tennessee Valley |
2004 |
| Reid, Sharyl M. |
Color & Appearance |
Southern |
2010 |
| Reinker, James K. |
Automotive |
Detroit |
1997 |
| Reitman, Maureen |
Medical Plastics |
Eastern New England |
2025 |
| Reso, Ron |
Automotive |
Detroit |
2000 |
| Richardson, Paul N. |
Extrusion |
Philadelphia |
1993 |
| Richmond, Lois |
Injection Molding |
Western Michigan |
1997 |
| Richmond, Robert M. |
Marketing & Management |
Western Michigan |
1997 |
| Rife, Edward |
Automotive |
Detroit |
1998 |
| Riley, David W. (D) |
Polymer Modifiers & Additives |
Palisades |
2002 |
| Rios, Antoine |
Composites |
Milwaukee |
2016 |
| Rogers, Jay |
Vinyl Plastics |
Palisades |
1997 |
| Root, Donald |
Injection Molding |
Detroit |
2006 |
| Rotheiser, Jordan (D) |
Product Design & Development |
Chicago |
2002 |
| Rush, Kimberly |
Vinyl Plastics |
Chicago |
2015 |
| Rushdy, A. K. "Tony" |
Blow Molding |
Quebec |
1993 |
| Russell, Robert D. |
Injection Molding |
Rochester |
1992 |
| Rutland, Samuel F. |
Vinyl Plastics |
Carolinas |
1993 |
| Sadowsky, Maurice J. |
Marketing & Management |
Philadelphia |
2004 |
| Schipper, Peggy S. |
Vinyl Plastics |
Palisades |
2006 |
| Schmidt, Lawrence R., Dr. |
Injection Molding |
Hudson-Mohawk |
2007 |
| Schneider, Larry |
Rotational Molding |
Rock Valley |
2006 |
| Schoeller, Russell E. (D) |
Blow Molding |
Chicago |
1996 |
| Schoenberg, Julian |
Thermoplastic Materials & Foams |
Carolinas |
1997 |
| Schultz, David R. |
Polymer Modifiers and Additives |
Akron |
2003 |
| Seavey, Alton W. |
Injection Molding |
Connecticut |
1995 |
| Shah, Suresh |
Automotive |
Detroit |
2004 |
| Shah, Vishu |
Injection Molding |
Southern California |
2009 |
| Shekita, Gregory A. (D) |
Mold Making Design |
Piedmont Coastal |
1997 |
| Shelton, Harry C. (D) |
Thermoset |
Buffalo |
1993 |
| Shih, Chi-Kai |
Polymer Analysis |
Baltimore-Washington |
2002 |
| Shirley, Gaylord |
Mold Making & Mold Design |
South Florida |
1994 |
| Shrader, Owen A. |
Injection Molding |
Kentuckiana |
1993 |
| Shute, Raymond J. (D) |
Thermoplastic Materials & Foams |
Chicago |
2003 |
| Simko, Timothy D. |
Composites |
Michiana |
2009 |
| Slawska, Robert A. (D) |
Blow Molding |
Newark |
1998 |
| Sloss, Thomas J. |
Injection Molding |
Connecticut |
2004 |
| Smith, Clarence G. |
Product Design & Development |
Southern California |
2009 |
| Smith, Thomas L. (D) |
Mold Making & Mold Design |
Northern Indiana |
1995 |
| Smith, William L. |
Injection Molding |
Southern |
2009 |
| Sosa, Marie-France |
Injection Molding |
Quebec |
2017 |
| Soskey, Paul R. |
Engineering Properties & Structure |
Newark |
2004 |
| Spalding, Mark |
Extrusion |
Mid-Michigan |
2012 |
| Spalter, Gary |
Injection Molding |
New York |
1999 |
| Squires, Paul H. (D) |
Extrusion |
Carolinas |
2002 |
| Starkey, Ralph |
Decorating & Assembly |
Tri-State |
2006 |
| Steele, Scott W. |
Blow Molding |
Toledo |
2014 |
| Steil, Frederick G. (D) |
Mold Making & Mold Design |
Detroit |
2005 |
| Steiner, Martha M. |
Plastics Analysis |
Golden Gate |
1997 |
| Stratton, Douglas |
Automotive |
Detroit |
1998 |
| Sun, Luyi , Dr. |
Engineering Properties & Structure |
Connecticut |
2018 |
| Suthers, Johnny |
Color & Appearance |
TN-VA-Holston Valley |
2003 |
| Tam, Edwin |
Bioplastics & Renewable Technologies and Additive Manufacturing |
|
2019 |
| Tamsen, Roger (D) |
Injection Molding |
Milwaukee |
2001 |
| Taranto, Alfred |
Injection Molding |
Carolinas |
1998 |
| Taylor, Gerald (Gary) W. (D) |
Injection Molding |
Akron |
2016 |
| Thomas, Michael P. |
Injection Molding |
Milwaukee |
2008 |
| Todd, William H. |
Automotive |
Detroit |
1993 |
| Trinklein, Robert S. |
Color & Appearance |
Eastern New England |
2005 |
| Turng, Lih-Sheng (Tom) |
Injection Molding |
Milwaukee |
2014 |
| Uglum, Paul A. |
Decorating & Assembly |
|
2016 |
| Vadhar, Parimal (Perry) |
Thermoplastic Materials & Foams and Flexible Packaging |
Carolinas |
2014 |
| Vaidya, Uday |
Composites |
none |
2018 |
| Wagner, John R., Jr. |
Extrusion |
Rochester |
2015 |
| Wagner, Richard C. |
Flexible Packaging |
South Texas |
2007 |
| Walker, Dale (D) |
Extrusion |
South Texas |
1999 |
| Waller, Paul |
Flexible Packaging |
Ontario |
2007 |
| Walling, Ronald L. |
Plastics Environmental |
Chicago |
2003 |
| Walsh, Thomas |
Engineering Properties & Structure |
South Texas |
2003 |
| Wayrick, Isobel |
Marketing & Management |
Newark |
2000 |
| Wegelin, Robert C. |
Polymer Modifiers & Additives |
Akron |
2004 |
| Weiler, Robert G. |
Vinyl Plastics |
Akron |
2021 |
| Weinberg, Elliott (D) |
Polymer Modifiers & Additives |
Palisades |
2001 |
| Weisfeld, Lewis B. |
Vinyl Plastics |
Philadelphia |
2002 |
| Wells, William |
Thermoforming |
Mid-Michigan |
2006 |
| Wendle, Bruce C. |
Injection Molding |
Pacific Northwest |
1992 |
| Wenskus, James J. Jr. |
Injection Molding |
Rochester |
2005 |
| West, Brian |
Color & Appearance |
Smoky Mountain |
2000 |
| Whitney, Jr., Alva E. (D) |
Vinyl Plastics |
Palisades |
1992 |
| Williams, Gordon |
Blow Molding |
Newark |
2001 |
| Williams, Joseph |
Polymer Modifiers & Additives |
Lehigh Valley |
2000 |
| Windscheif, William J. |
Automotive |
Detroit |
2016 |
| Winkler, Karen L. |
Medical Plastics |
Southern |
2007 |
| Witenhafer, Donald E.,Dr.(D) |
Engineering Properties & Structure |
Central Texas |
2008 |
| Witzler, Suzy I. |
Injection Molding |
Rocky Mountain |
2002 |
| Wolverton, Mark, P. |
Product Design & Development |
Chicago |
2015 |
| Womer, Timothy W. |
Extrusion |
Akron |
2010 |
| Wright, A. Nelson (D) |
Vinyl Plastics |
Quebec |
1997 |
| Wyer, Raymond T., Jr |
Injection Molding |
Chicago |
1999 |
| Yarbrough, Delbert |
Blow Molding |
Southern California |
1995 |
| Zeller, Robert C. |
Color & Appearance |
Lehigh Valley |
1997 |
| Zheng, Wei, Dr. |
Applied Rheology |
Upper Midwest |
2023 |
| Zimmerman, Charles C. (D) |
Injection Molding |
Southern California |
1993 |
