ANTEC® 2025 - Proceedings - Tuesday (Speakers, Moderators & TPCs)
Go to …
Automotive
|
Numerical Simulation and Experimental Validation of Epoxy Potting for Automotive Electronics: Comparative Analysis and Process Improvements
Srikar Vallury, Moldex3D Northern America, Inc. |
View Document |
Enhancing Electric Vehicle Efficiency Through Simulation-Based Optimization of Battery Covers
April Brown, Moldex3D Northern America, Inc. |
Not Part of Proceedings |
Environmental Stress Cracking of Automotive Interiors Exposed to Common Personal Care Products
Sadella Santos, Exponent |
Not Part of Proceedings |
Advanced PEEK Nanocomposite Insulation for E-Mobility Application
Monoj Ghosh, Eaton Corporation |
Not Part of Proceedings |
New Light Weight Reinforced Thermoplastic (LWRT) with Inline Applied Functional Adhesive Film and its Automotive Application
Richard Kim, Hanwha Azdel |
View Document |
A Numerical Model to Predict Temperature Distribution of Glass Filled Flame-Retardant (FR) Polypropylene Part under Fire Exposure
Amol Avhad, SABIC Research and Technology Pvt Ltd, India |
View Document |
Engineering Properties & Structure
|
Gamma Irradiation and Thermal Treatment Effects on PAEK Polymer Crosslinking
Samuel Swan, Sandia National Laboratories |
View Document |
Crystallization Kinetics and Polymorphism in PA66/6I6T Blends: Influence of Chain Mobility and Temperature
Xiaoshi Zhang Penn State Behrend |
View Document |
Influence of Processing Technique on Self-healing and Mechanical Behavior of Covalent Adaptable Networks Prepared via Thiol-ene Chemistry
Kory Schimmelpfennig, Rochester Institute of Technology |
View Document |
Modeling Poisson Ratio in Thermoplastic Polymers for Thermo-Mechanical Analysis
Paul Van Huffel Altair Engineering, Inc. |
View Document |
Foams
|
State of Sustainability & Circular Economy in Petrochemical, Polymers and Foams via Chemical Methods
Ashutosh H. Sharma, Independent Consultant |
View Document |
Crosslinked Polypropylene Foam Parts Via Rotational Molding
Denis Rodrigue, Laval University |
View Document |
Bio-Mimetic Micro-/Nano-Layered Foams: In Situ Visualization of Cell Nucleation and Growth Dynamics
Patrick Chang Dong Lee, University of Toronto |
View Document |
3D Printing of Functionally Graded Foams Using a Co-Extrusion Process with Mixer Nozzle
Aboutaleb Ameli, University of Massachusetts Lowell |
View Document |
Fabrication and Testing of Thermally Expandable Microspheres/Graphene Foam for Pressure Sensing
Mohammad Hassan Aghvami Panah, University of Massachusetts Lowell |
View Document |
Injection Molding: Composites
|
Microstructure Filling and Resulting Material Properties of Micro-Form-Fitted Plastic/Metal Joints
Moritz Mascher, IKV at RWTH Aachen University |
View Document |
The Role of Fiber Cross-Section: A Comparative Study on How Flat Fibers Affect Processing and Part Performance
Erik Foltz, The Madison Group |
View Paper
View Presentation
|
Effect of Fiber Content on the Weld Line Strength of Polypropylene Using Gas-Assisted Push-Pull Processing
Francesco Maciariello, University of Padova |
View Document |
Influence Of Injection Molding Process on The Mechanical Properties Of Battery Cell Holders Studied With Virtual Simulations
Peter Rucinski Dassault Systèmes |
View Document |
The Impact of Anisotropic Thermal Conductivity of Talc-Filled Composites in Injection Molding Simulation
Vishak Perumal, Autodesk |
View Document |
Mechanical and Processing Performance of Cellulose Wood Fiber Polypropylene Composites Utilizing Hot Runner Injection Molding
Nicholas Bowen, University of Massachusetts Lowell |
View Document |
Non Halogen Flame Retardant Materials
|
Using Non Halogenated and Non Brominated FR Technology to Create Engineering Materials
Rick Wilson, PolyVisions Inc. |
View Document |
Chemistry, Energy Consumption and Green House Gases for FR Precursors of Non Halogenated Flame Retardants
Margaret Baumann, Performance Polymers and Additives LLC/Pinfa North America |
View Document |
Commercializing Specialty Chemicals in Today's Business Environment
Roger Avakian Avakian Polychem Consulting |
View Document |
Updates to Regulations in the United States and European Union and How These May Impact Plastics and Plastic Additives
Shannon Gainey, JM Huber Corporation |
View Document |
Application of Halogen-Free Polymeric Flame Retardant in PFAS-Free PC and PC Blends
Xiudong Sun,FRX Polymers, Inc. |
View Document |
Advances in Flame Retardant Technology - Replacement of Antimony Trioxide in PVC and ABS
Gary Rex, JLS Fire Retardant Chemical Co. |
View Document |
Polymer Analysis
|
Advanced Characterisation of the Ageing Effects of Polymer Powders for Additive Manufacturing
Shona Marsh, NETZSCH |
View Document |
Fundamental Studies to Investigate Blocking and Plate-Out of Silicone Masterbatch
Joy Lee Dow Chemical |
View Document |
Thermal Analysis of Polymers with Real-Time Image Analysis
Tianhong Chen, Cannon Instrument |
View Document |
Continuous Inline Process Monitoring with Inline Spectroscopy in Polymer Extrusion
Frank Köger, ColVisTec |
View Document |
Exploring Volatility of FEPs at High Temperatures
Bo Xu, Superior Essex |
View Document |
Recycling 1
|
Opportunities for Agricultural Plastics in Pennsylvania
Gamini Mendis, The Pennsylvania State University - The Behrend College |
View Document |
Plastic Waste vs. Circular Economy: Lessons Learned
Robert Peoples, CARE |
Document Not Available |
Unlocking the Potential of a Circular Economy for Post Use Plastics
Christopher White, Ramboll |
View Document |
Delamination of Plastics-to-Metal Multi-Materials Using UV/Heat Induced Foaming Polymer
Hiroshi Ito Yamagata University |
View Document |
Application-Specific Property Profiles in Polypropylene Recycling: Insights from circPLAST-mr
Joerg Fischer, Johannes Kepler University Linz |
View Document |
Reclamation Of Polyolefins from Multilayer Plastic Packaging Waste
Ke Zhan, Auburn University |
Document Not Available |
