Application of Artificial Intelligence to Shorten Thermal Index Testing to Accelerate Polymer Regulatory Approvals Jessica Hemond, TE Connectivity |
View Paper |
Machine Vision Applied to Automatic Recognition of 2D Engineering Drawings and 3D Model Generation Zhe-Wei Zhou, Chung-Yuan Christan University |
View Paper |
Dynamic Process Control Using Real-Time In-Mold Monitoring and AI Alec Redmann, NETZSCH |
View Presentation |
Enhancing Extrusion Process Diagnosis and Monitoring Through Machine Learning John W.S. Lee, LS Cable & System Ltd. |
View Paper |
Generation of a Physical Meta-Model for Simulation Purposes Based on Injection Molding Process Data Michael Klann, KraussMaffei Technologies GmbH |
View Paper View Presentation |
Training of AI Model Using Data Generated by Analytical Solution in Extrusion John W.S. Lee, John W.S. Lee |
View Paper |
A Live-Capable Model for Secondary Flow and Layer Distribution in Flat Film Dies Malte Schön, Institute for Plastics Processing (IKV) at RWTH Aachen University |
View Paper |
A Screwless Plasticating Extruder Towards Single Pellet Extrusion David Kazmer, University of Mass Lowell |
View Paper |
A Simulation Application in An Extrusion Die Design Qingping Guo, Draka EHC |
View Paper |
Detecting and Understanding Roll Deposits in Flat Film Extrusion Daniel Grüber, Institute for Plastics Processing (IKV) at RWTH Aachen University |
View Paper |
Load Differences Between the Screws in the Solids Conveying Zone of Co-Rotating Twin-Screw Extruders Laura Austermeier, Paderborn University |
View Paper |
Material and Process Effects on the Tribological Behavior of Polymer Bulk Materials Jan Landgraeber, Kunststofftechnik Paderborn |
View Paper |
Blending PLA With TPU to Enhance Its Adhesive Bonding Properties in Two-Component Injection Molding Marco Klute, University of Kassel |
View Presentation |
Characterization of the Degradation Processes of PLA Starch Composites in Hydrothermal Environment Victoria Goetjes, University of Kassel; Institute of Material Eingineering; Polymer Engineering |
View Presentation |
Comparative Study of Blending Approaches for Enhancing PLA/PBS Bioplastics: Pre-Process Melt Compounding vs. Direct Dry Blending Milad Azami, University of Mass Lowell |
View Presentation |
Growth of Chain Orientation During Post-Processing Annealing of Poly(lactic Acid) and Its Blend With Poly(vinyl Alcohol) Hoang-Giang Dai Vo,, Japan Advanced Institute of Science and Technology |
View Paper View Presentation |
Structure-Property Relationships in Blown Films Based on Blends of PLA and Amorphous PHA Rajendra Krishnaswamy, CJ Biomaterials |
View Paper |
Study of the Properties of Hydrolytic Degradable Polyglycolic Acid and Its Blends with Polylactic Acid, and Its Application for the Dissolvable Downhole Tool Peixiang Xing, CNPC USA |
View Paper |
Advancing Polyamide 6 Properties Through Graphene Nanoplatelet Selection and Loadings Siobhan Kilbride, Colloids LTD |
View Paper View Presentation |
Characteristics of Chopped Glass Fiber and Their Effect on Compounding of Reinforced Thermoplastic Composites Phillip Chu, Royal Technologies |
View Paper |
Development of a Model for the Prediction of Process-Induced Fiber Curvature in Long Fiber Reinforced Thermoplastics (LFT) Fabio Di Battista, Institute for Plastics Processing (IKV) at RWTH Aachen University |
View Paper |
Sustainable Thermoplastic Composite Parts Through Back Injection Molding of UD-Tapes With Recycled PET Materials Curdin Wick, Eastern Switzerland University of Applied Sciences |
View Paper |
The Influence of Multiple Recycling Rounds on the Properties of Shredded Glass Fibre Reinforced Organosheets Thomas Höftberger, Transfercenter fuer Kunststofftechnik |
View Presentation |
Melt-Mixed Thermoplastic Composites Based on Carbon Nanotubes for Energy Harvesting by Using the Thermoelectric Effect Petra Poetschke, Leibniz-Institut fuer Polymerforschung Dresden e.V. (IPF) |
View Presentation |
Investigations on the Polymerization Reaction of Caprolactam to Polyamide 6 for Reactive Pultrusion Laura Klis, Institut für Kunststofftechnik (IKT); University of Stuttgart |
View Paper |
Novel Method to Investigate the Mechanisms Acting in Weld Seams of Amorphous Thermoplastics Julia Dreier, Institut für Kunststofftechnik (IKT); University of Stuttgart |
View Paper |
On the Mechanism of Pore Formation in Polypropylene Breathable Membrane Wenyi Huang, Wenyi Huang |
View Presentation |
Rotational Molding of Crosslinked High Density Polyethylene Denis Rodrigue, Université Laval |
View Presentation |
Thermal and Mechanical Properties of Amorphous and Semi-Crystalline Polyamide Blends Hamid Mortazavian, Ascend Performance Materials |
View Presentation |
A Study on the Effect of Mesh Size on the Thermal and Electrical Conductivity of Expanded Graphite Polyetherimide Composite Fatema Tarannum, University of Arkansas |
View Paper |
Investigation on the Interaction Between Expansion and Vulcanisation Process for Rubber Foamed by Thermoplastic Expanding Microspheres Richard Frohberg, Institute for Plastics Processing (IKV) at RWTH Aachen University |
View Paper |
Continuous Production of Cellular Ceramics Through Thermoplastic Foam Extrusion Thomas Forstner, Institute of Polymer Technology - University Erlangen-Nuremberg |
View Paper |
Micro/Nano-Layered Film/Foam Structures: A Novel Approach to Passive Cooling Building Materials Patrick Chang Dong Lee, University of Toronto |
View Presentation |
The Effect of Nucleating Agents and Post-Processing on the Foaming Dynamics of TPUs Shu Kai Yeh, National Taiwan University of Science and Technology |
View Presentation |
Evaluation of Hyperelasticity and Fracture Characteristics of Carbon Nanotube Filled Fluoroelastomers Jungsub Lee, University of Illinois at Chicago |
View Paper |
Ultra Low Carbon Footprint Thermoplastic Elastomers Liang Xu, Avient Corporation |
View Presentation |
© 2024 SPE-Inspiring
Plastics
Professionals.
All rights reserved.
84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.
SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400
SPE Australia/New Zealand
More
Information
SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32
SPE India
More
Information
SPE Middle East
More
Information
3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More
Information
ANTEC® 2024 Onsite Emergency Procedures >>
This educational program is provided as a service of SPE. The views and opinions expressed on this or any SPE educational program are those of the Speaker(s) and/or the persons appearing with the Speaker(s) and do not necessarily reflect the views and opinions of Society of Plastics Engineers, Inc. (SPE) or its officials, employees or designees. To comment or to present an opposing or supporting opinion, please contact us at info@4SPE.org.
Refund Policy for Events
Full refunds, minus a $50 processing fee, will be granted until February 13. No refunds will be granted after February 13.
Registration may be transferred before February 13. No transfers after February 13. Please contact customerrelations@4spe.org for assistance in transferring a registration.
Event Code of Conduct
All attendees, speakers, sponsors, vendors, partners, SPE staff, and volunteers at ANTEC® and its events, or any SPE event that is virtual or live, are required to adhere to the following Code of Conduct. Event organizers will enforce this Code throughout the SPE events. More information. Report an Incident.
Copyright & Permission to Use
SPE may take photographs and audio/video recordings during the conference, pre-conference meetings and receptions that may include attendees within sessions, networking areas, exhibition areas, and other areas associated with the conference both inside and outside of the venue. By registering for this event, all attendees are providing permission for SPE to use this material at its discretion on SPE's websites, marketing materials, and publications. SPE retains ownership of copyright to all photographs and audio/video recording obtained at this event and attendees may request copies of any material in which they are included.
Anti-Trust Statement
For general questions and registration, contact customerrelations@4spe.org.
For questions about speakers and the program, contact Iván López at ilopez@4spe.org.
SPE's strive to host inclusive, accessible events that enable all individuals, including individuals with disabilities, to engage fully. To request an accommodation or for inquiries about accessibility, please contact at Scott Marko +1 203.740.5442 and smarko@4spe.org. At least two weeks' advance notice will help us to provide seamless access.