lnfluence of the Pin Closing Speed on the Gate Quality for Multicavity Applications Christian Estorer, Barnes Group Acquisition GmbH |
View Paper |
Method for Evaluating Process Stability in Injection Molding Using High-Resolution Process Data and Dynamic Time Warping Correspondences Julia Knoll, University of Kassel |
View Presentation |
Practical Modeling of Non-Isothermal Crystallization Behavior of Semi-Crystalline Polymers under from Slow to Ultra-fast Cooling Rates for Injection Molding CAE Motonori Nakai, SAEILO JAPAN; INC. |
View Paper View Presentation |
Designing Conformal Cooling Simply and Economically Stephan Kartelmeyer, Bielefeld University of Applied Sciences |
View Paper |
Study on the Evaluation of Weight Reduction for Gas-Assisted Injection Molding of Polyetheretherketone (PEEK) Parts Ching-Te Feng, Chung-Yuan Christan University |
View Presentation |
Property Calibration of Fiber Composites for Improved Injection Molding Shape Prediction Rusell Speight, Autodesk Australia Pty Ltd |
View Paper |
3D Printing Biocompatible Nylon PA 12 for Healthcare Applications Jesse Dunaway, Endeavor 3D |
View Presentation |
Effect of Epoxy Equivalent Weight on Cure Characteristics and Thermal Properties & Behavior of Comparable 2k Epoxy-Amine Polymeric Systems Xiaoping Guo, Abbott Laboratories |
View Paper |
A Paradigm Shift with Micro Molding Brent Hahn, Isometric Micro Molding; Inc. |
View Presentation |
Evaluation of the Influence of Atmosphere, Temperature, Dose, and Dose Rate during Irradiation of Medical Device Polymers Md Kamrul Hasan, Pacific Northwest National Lab |
View Presentation |
Integrating Sustainability in Medical Autoinjectors: Proof-of-Concept Study of Renewable Materials and its Environmental Impact Zeming Gou, Eli Lilly & Co. |
View Presentation |
Development of a Continuous PET Depolymerization Process as a Basis for Back-to-Monomer Recycling Method Lars Biermann, Krauss Maffei Corporation |
View Presentation |
Enhancement of Post-Consumer Recycled Polycarbonate Performance for Sustainable Solutions Manoj Nerkar, Dow Chemical |
View Presentation |
Extrusion Pretreatment for Enzymatic Recycling of Polyesters Margaret Sobkowicz, University of Massachusetts Lowell |
View Presentation |
Fabrication of Antibacterial High-Performance Filter Media from Waste Polyethylene Terephthalate and Surgical Masks Amani Russell, University of Massachusetts Lowell |
View Presentation |
Investigation of Gel Formation and Degradation of Representative Polyolefin Recyclates Elena Berg, Institute for Plastics Processing (IKV) at RWTH Aachen University |
View Paper |
Assessment of Impact Damage in Fully Adhered Commercial Roofing Systems Yi Ding, Lehigh University |
View Paper |
Ductility Loss of CPVC Pipe Due to Exposure to Solvent Cement Florian Koschitzki, Plastic Expert Group |
View Paper |
Effects of Knit Lines on the Creep and Fatigue Performance Properties of Modified Poly(pheylene Ether) Jeffrey Jansen, The Madison Group |
View Paper |
Scratch Behavior and Scratch Visibility Modeling of Textured Polymeric Surfaces Sumit Khatri, Texas A&M University |
View Paper |
Simulation-Based Failure Analysis of Torsionally Stressed Lightweight Structures in Fibre Composite-Elastomer Hybrid Design Moritz Wilkowski, Universität Duisburg-Essen |
View Paper View Presentation |
Impact of Thermal Aging on PVC and Foamed PVDF Jackets in Power-Over-Ethernet Cable Performance Bo Xu, Superior Essex Communications |
View Paper View Presentation |
Rheological Behavior of Poly(amic acid)-Surface Modified Organoclay Suspensions Andekuba Andezai, University of Cicinnati |
View Paper |
Characterization and Simulative Prediction of Wall Slip Behavior in Plastics Processing Philip Reitinger, Institut für Kunststofftechnik (IKT); University of Stuttgart |
View Paper |
Wall Slip-Free Measurement of the Steady-State Shear Viscosity of Filled Rubber Compound Using a Closed Boundary Rheometer Dennis Kleinschmidt, Paderborn University |
View Paper |
Role of Glass Fiber on the Flow-Induced Crystallization of Poly(ether Ether Ketone) Xiaoshi Zhang, Penn State Behrend |
View Paper |
Influence of Post-Processing on the Mechanical Properties of Laser Sintered Parts Ruben Schlutter, SKZ KFE GmbH |
View Paper |
Injection Molds With Near-Contour Heat Pipes From the 3D Printer - A New Temperature Control Concept Dennis Kraemer, Hochschule Bielefeld (University of applied Sciences and Arts Bielefeld) |
View Paper |
In-Plane Compressive Behavior of Additive Manufactured Dual Material Auxetic Structures Mohammad Ahmed, Southeastern Louisiana University |
View Presentation |
Investigation of the Process-Structure-Property Relationships During 3D Printing With Liquid Crystalline Polymers Kai S. Johann, Institut für Kunststofftechnik (IKT); University of Stuttgart |
View Presentation |
Tailored Microstructure in Laser-Based Powder Bed Fusion of Polymers Simon Cholewa, Institute of Polymer Technology - University Erlangen-Nuremberg |
View Paper |
© 2024 SPE-Inspiring
Plastics
Professionals.
All rights reserved.
84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.
SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400
SPE Australia/New Zealand
More
Information
SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32
SPE India
More
Information
SPE Middle East
More
Information
3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More
Information
ANTEC® 2024 Onsite Emergency Procedures >>
This educational program is provided as a service of SPE. The views and opinions expressed on this or any SPE educational program are those of the Speaker(s) and/or the persons appearing with the Speaker(s) and do not necessarily reflect the views and opinions of Society of Plastics Engineers, Inc. (SPE) or its officials, employees or designees. To comment or to present an opposing or supporting opinion, please contact us at info@4SPE.org.
Refund Policy for Events
Full refunds, minus a $50 processing fee, will be granted until February 13. No refunds will be granted after February 13.
Registration may be transferred before February 13. No transfers after February 13. Please contact customerrelations@4spe.org for assistance in transferring a registration.
Event Code of Conduct
All attendees, speakers, sponsors, vendors, partners, SPE staff, and volunteers at ANTEC® and its events, or any SPE event that is virtual or live, are required to adhere to the following Code of Conduct. Event organizers will enforce this Code throughout the SPE events. More information. Report an Incident.
Copyright & Permission to Use
SPE may take photographs and audio/video recordings during the conference, pre-conference meetings and receptions that may include attendees within sessions, networking areas, exhibition areas, and other areas associated with the conference both inside and outside of the venue. By registering for this event, all attendees are providing permission for SPE to use this material at its discretion on SPE's websites, marketing materials, and publications. SPE retains ownership of copyright to all photographs and audio/video recording obtained at this event and attendees may request copies of any material in which they are included.
Anti-Trust Statement
For general questions and registration, contact customerrelations@4spe.org.
For questions about speakers and the program, contact Iván López at ilopez@4spe.org.
SPE's strive to host inclusive, accessible events that enable all individuals, including individuals with disabilities, to engage fully. To request an accommodation or for inquiries about accessibility, please contact at Scott Marko +1 203.740.5442 and smarko@4spe.org. At least two weeks' advance notice will help us to provide seamless access.