The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?
James F. Hoover, Laura G. Schultz-Hume, Paul D. Sybert, May 2012
New polycarbonate blends afford the first UV stable resins with low color, low smoke and low OSU Heat Release values (< 65/65). In addition, the resins can be prepared with good melt flow and excellent ductility. The excellent colorability and UV stability, combined with the compliance to the FAA/OEMs fire, smoke and toxicity regulations, allows for the fabrication of interior opaque components such as interior aircraft windows frames, seat parts, grilles and personal service units.
Kevin D. Delaney, Giuliano Bissacco, Eric Moore, David Kennedy, May 2012
Understanding interfacial characteristics between a polymer and its associated tool surface is critical to successful optimization of processes such as injection moulding, embossing and extrusion used to produce polymer parts. One of the factors characterizing the strength of the polymer-tool interaction is the adhesion energy and it is specific for a particular polymer-tool pair. Its magnitude depends upon the tool material, tool coating and surface contamination, where relevant, polymer chemical structure, processing conditions and the surface roughness of the tool substrate. This paper presents the results of an experimental study aimed at determining the effect of selected tool surface characteristics on the work of adhesion, by measuring contact angles of polymer droplets on the surfaces. The experimental set-up, selection of test parameters and main challenges faced to date are described and experimental results presented.
This Paper will review the newest Anti-Yellowing and Weather Resistant WHITE Pearlescent Pigment based on Mica. This NEW AY-W (anti-yellowing and Weather resistant) pigment will be called experiment #1 AY-W , for ease of reference . This New pigment consists of a mica platelet coated with titanium dioxide (TiO2). It is just this TiO2 coating that can contribute to yellowing under certain conditions. Through a revolutionary technology, a new product that has encapsulated the TiO2 surface with an additional coating to make it less reactive. Now your plastic and print applications can maintain a long-lasting silver-white appearance.
In this study, the effect of dissolved CO2 on the thermal behavior of PLA with various D-contents (with and without talc) has been investigated during the cooling process at atmospheric pressure in a regular differential scanning calorimeter (DSC) and a high-pressure DSC. The results show that the crystallinity of PLA samples improves by increasing the CO2 pressure, reducing the D-content, and adding talc. Also, Tg and Tm shift to lower temperatures as the pressure increases, due to the plasticization effect of CO 2.
Iftekhar Ahmad, Shan Cheng, Grace Hsuan, Christopher Li, Richard Caimcross, May 2012
Antioxidants can increase durability of polyethylene, and clay nanoparticles can improve the mechanical properties of polyethylene. This paper describes models that predict oxygen and antioxidant diffusion and reaction with free radicals in thick polyethylene and its clay nanocomposites. Predicted antioxidant degradation is compared to experimental antioxidant profiles measured by oxidative induction time. To achieve qualitative agreement between model and experimental results, the initial free radical concentration in nanocomposite has to be higher than in polyethylene.
Tahereh Mousavand, Maryam Dini Pierre J. Carreau, Pascal Hubert, Musa R. Kamal, May 2012
Depolymerization of PET to high molecular weight oligomers could introduce opportunities to re-use PET waste via chemical recycling. Hydrolysis of PET in the presence of water/steam was carried out in a twin screw extruder, at barrel temperatures of 265°C and 300°C with screw speeds of 20, 60 and 200 rpm. The extruded products were characterized to determine intrinsic viscosity (IV) of samples as well as thermal properties (DSC) and rheological behavior. Proton nuclear magnetic resonance (HNMR) analysis was used to estimate carboxyl end group content. The results showed that the average molecular weight (Mw) of extruded polymer was reduced to less than 10,000 g/mol
POM or polyoxymethylene is an engineering resin used primarily for injection molded parts that replace metal. POM’s usefulness is derived from the combination of strength, stiffness, toughness, creep resistance, and lubricity. POM homopolymer and copolymer compete in this market space. Homopolymer grades have some mechanical advantages while copolymer grades have better thermal and chemical stability. In 2010 Ticona introduced a new high strength, high viscosity POM copolymer with the mechanical properties of a typical homopolymer, while maintaining copolymer stability. This paper introduces an improved flow, high strength POM copolymer, its property profile, salient features and potential applications.
Mary Moriarty, David Kazmer, Stephen Johnston, Christopher Santeufemio, May 2012
A significant barrier to widespread application of nano-engineered devices is the interfacing of small components. Current macro-manufacturing systems do not have the capability for the precise alignment nano-features require. In this paper, a novel method of self-alignment and assembly is discussed. This approach uses kinematic coupling and elastic averaging across multiple length scales to ensure alignment of the smaller features. Physical realization with ion beam etching, deposition, and thermal imprint lithography are also discussed.
Securing the right form of intellectual property protection is sometimes overlooked during the development of a new product. However, intellectual property protection should not be ignored. The right combination of patent and trademark protection can give a company long-term control over its invention. For lifetime protection of product designs, companies should consider using design patents and trademarks together. Design patents can initially be used to exclude others from copying the design. This will provide a company time to develop consumer recognition in the design so that it can continue to be protected as a trademark even after the patent expires.
Miranda Marcus, Kenneth A. Holt, Antonio Mendes, May 2012
The introduction of servo-driven ultrasonic technology, with Dukane’s iQ Series Servo system, provides a new level of control to an already fast and flexible welding method. This breakthrough has allowed greater consistency than ever before possible with ultrasonic welding, one of the most widely used processes for bonding polymers. In the medical industry, there is a great need for reliable weld results in production. Some of the most forward thinking manufacturers of medical parts have already benefitted from servo-driven ultrasonic equipment. One of these manufacturers, Value Plastics, A Nordson Company, a leader in the design and manufacture of plastic tube fittings and connectors, began working with Dukane's servo-driven ultrasonic welder in the second quarter of 2010. Already, they have used the servo welder in full production projects and are completing the research and development phase for additional jobs. Every one of these projects has shown improved weld consistency over the previously employed pneumatic welders.
Sug Hun Bumm, James L. White, Avraam I. Isayev, May 2012
The damage of glass fibers at various conditions was investigated by varying viscosity, screw speed, screw configuration and glass fiber length and diameter. Increasing screw speed, melt matrix viscosity and glass fiber concentration were found to increase the extent of fiber breakage. Based on our experimental data and Euler buckling theory the composite modular kinetic model to describe glass fiber damage was developed. Regions of major and minor fiber breakage in co-rotating twin screw extruder were established. The simulation program based on experimental data and kinetic constants was developed. Comparisons were made between simulated results and experimental data.
Mohammadreza Nofar, Mohamad Barzegari, Alireza Tabatabaei, Mehdi Keshtkar, Chul B. Park, May 2012
The dependency of PLA extrusion foaming on three different fillers (nanoclay, nanosilica, and talc) and their impact on crystallization has been investigated. PLA with nanofillers showed smaller cells due to more nucleation sites, whereas talc showed bigger cells. Nucleated crystals can be a secondary reason for the increase of cell density for all cases. However, increasing the filler content decreased the cell size in the case of talc due to the higher crystallization rate, which creates bigger nucleation sites with bigger cells
There are growing interests in the area of flame retardant (FR) thermoplastic materials, especially in thin wall applications. Consistency in flame rating measurement is critical in FR resin development and commercialization. However, flame performances are difficult to assess due to a multiplicity of factors that influence the material behavior, such as, molding conditions, operator training and orientation of specimen during testing. In this study we have investigated the role of ? mold/barrel temperatures ? injection speed ? switch point ? holding pressure on flame properties of a Lexan* grade of polycarbonate so that we can eliminate/ reduce the effects of molding parameters during flame testing This was done by first investigating the effect of post molding residual stress on flame properties. It was observed that the such properties of are influenced by the post- molding residual stress profile built-in the bars and that such profile is in-turn influenced by the processing conditions.
Two recent efforts on mechanical characterization of ductile polymeric thin films are presented. One is on fracture toughness determination of polyolefin thin films and the other is on scratch deformation study of laminated films for food packaging applications. Characterization of fracture toughness of ductile polymer thin films is nontrivial. It requires extreme care in sample preparation to avoid premature film damage, in fixture design to minimize out of plane film rotation, and in meaningful analysis to establish structure-property relationship. The essential work of fracture approach has been chosen for quantifying fracture toughness of ductile polyolefin films. Issues related to sample preparation, data generation and interpretation are discussed. Possible correlation between the fracture toughness and other industrial practices is also made. In the case of scratch test, it is found that the scratch performance correlates well with the field performance of the films. The usefulness of the scratch test for evaluating film structural integrity, adhesive strength between film layers, and laminate structural design optimization is discussed.
This paper investigates the foaming behaviour of crosslinked Ethyl-vinyl acetate (EVA) using a chemical blowing agent (CBA). In this study, foaming experiments were conducted using the chemically crosslinked polyolefin foamed BUN process, with the help of a compression molding machine. It was found that an optimum degree of crosslinking was needed to produce high quality EVA foams with high expansion ratios. A mountain-shape curve can be used to describe the relationship between the expansion ratio of the EVA foams and the crosslinking content. Furthermore, with more blowing agent used in the foaming process, the value of the optimum crosslinking content at the expansion ratio peak increases.
We have investigated epoxy/MWCNT nanocomposites and propose that the primary role of the nanoparticles is to reduce stress concentrations at internal defect sites. This leads to improvement in ductility and tensile strength without affecting modulus. The shielding of internal defects may also allow synergistic interaction with secondary particles. This behavior is reported to promote improved fracture toughness in the presence of pre-formed thermoplastic particles, and substantially enhanced modulus and strength when coupled with exfoliated nanoplatelets.
This paper investigated the thermal and dynamic mechanical properties of solid and microcellular injection molded PLA/ PHBV blends of different weight ratios. The properties were characterized by DSC and DMA. The results showed that when the content of PHBV exceeded 45% it could significantly affect the crystallinity of the PHBV and improve the G' for both solid and microcellular components. It was also found the Tg of the PLA phase decreased with increasing PHBV content.
Using solid-state shear pulverization, we have identified the potential to functionalize polypropylene by taking advantage of near ambient temperature reactions. Polypropylene was pulverized in the presence of benzoyl peroxide; under these temperature conditions the decomposition of benzoyl peroxide results in the formation of benzoyloxy radicals that react with the polypropylene chain, introducing ester functional groups onto the chain. Fourier transform infrared spectroscopy indicates that such functionality cannot be obtained using conventional high temperature processing methods.
John W. Rodgers, Burak Bekisli, John P. Coulter, May 2012
Two types of polystyrene were injection molded into macroscale parts with microscale features. UV photolithography was utilized to create microchannels on the surface of silicon wafers. Higher mold temperatures facilitated filling of the microfeatures. In addition, an undercut microchannel feature promoted pillar elongation. HIPS exhibited greater heights at identical mold temperature conditions. Pillars with heights of 15 µm were molded with an aspect ratio of 9.3. Polymer surfaces could provide control of biological cell activity
Polymer nanocomposites offer a potential solution to improve, while maintaining, multiple, incompatible properties, such as mechanical and optical performance. In order to demonstrate significant property enhancements, a well-controlled dispersion of a nano-scale filler into a polymer matrix is required. Melt processing represents the most economical and flexible route to producing thermoplastic nanocomposites. This paper describes a set of melt compounding experiments to help establish the kinetic and thermodynamic factors that govern the dispersion of layered silicates in ionomers. The results show that the stress imparted during the melt blending influences dispersion. However, the thermodynamic compatibility between the filler surface, organic modifier and matrix polymer plays a dominant role in the exfoliation process.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
English
French
German
Italian
Spanish
Portuguese
Hindi
Japanese
Korean
Chinese (Simplified)
Chinese (Traditional)
.jpg)
.jpg)
.jpg)
.jpg)
