The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?
Supercritical carbon dioxide (scCO2) was used as a processing aid to improve the level of exfoliation and, in some cases, the dispersion of nano-clay in polypropylene (PP). The anisotropic properties of injection molded nano-clay/PP composites were studied. The use of scCO2 with modified processing methods lead to materials which showed improvements in the mechanical properties of 78.4% compared to the pure PP matrix for a 18wt % clay loading. A further improvement in properties is expected with higher levels of nano-clay, improvements in the processing method, and the use of a highly crystalline PP matrix.
Troubleshooting serious problems with coatings on plastics requires quickly finding the cause. Delay can mean high costs, customer dissatisfaction and loss of reputation. To proceed rapidly an investigator must be able to select one or two most likely causes for further investigation. Facts Analysis is a useful, practical, simple tool for generating plausible possible causes and deciding which ones to pursue further. Therefore, blind alleys are avoided. An available workbook, Factory Applied Coating Troubleshooting Checklist leads the investigator through the D, the M-and most of the A of six-sigma DMAIC. It can be used by investigators of all educational backgrounds.
This experimental study examines the evolution of the extent of dissolution of the active pharmaceutical ingredient (API) indomethacin (INM) into the polymer excipient Eudragit E PO (E PO) on four screw configurations. The Fourier transform infrared spectroscopy (FT-IR) results show that kneading blocks accelerate the complete dissolution process. It is concluded that the kneading blocks, which cause the processed stream to undergo chaotic laminar extensional flow and are crucial to laminar distributive mixing, may be the main necessary mixing elements for the full dissolution of the drug in the polymer melt.
Injection molding is one of the most popular polymer processing techniques in plastics industries. Hot runner has become a standard component of injection molding molds due to a number of advantages, including reduction in raw material consumption, greater production rate, and lower power consumption. Hot-runner temperature distribution plays an important role in final product quality. A multi-input-multi-output (MIMO) generalized predictive control (GPC) is developed, implemented and tested for hot-runner temperature control on a reciprocating-screw injection molding machine. Experimental results prove that GPC can control hot-runner temperature accurately.
Jun Peng, Jian Wang, Ke Li, Lih-Sheng Turng, Xiang-Fang Peng, May 2011
Expandable thermoplastic microspheres were employed as chemical blowing agents to produce biodegradable polylactic acid parts. The surface characteristics of the samples were evaluated with a 2D surface roughness analyzer and a white-light 3D surface profiler. It was found that microcellular injection molded parts with ETM exhibit good surface quality, similar to conventional solid injection molded parts. The tensile properties of injection molded PLA samples with variable ETM weight ratios have been investigated. As shown by the testing results, the cell microstructures play an important role in the surface quality and mechanical properties.
Environmental stress crack resistance (ESCR) is a critical mechanical property for polyethylene in injection and rotational molding applications. Based on a very well characterized matrix of materials with widely varying densities and melt index, we have looked at broad orthogonal composition distribution (BOCD) as a means of improving ESCR without the processability and stiffness debits. Through blending high melt index, high density components with low density, low melt index components to a target MI/ density, ESCR improvements of up to two orders of magnitude are evident over their single component counterparts.
We present a novel platform for measurement of droplet dynamics and interfacial tension via polymer melt microfluidics (PMM). We utilize a flow focusing technique to form droplets or threads which then travel down a central channel. Upon cessation of flow, we monitor the relaxation of the droplets and threads and extract their interfacial tension. We demonstrate the technique using a polystyrene/polyamide (PS/PA) system and use the deformed droplet retraction method (DDRM) to determine the interfacial tension without any pre-processing of the samples in a confined geometry. The result agrees well with that of a previous work.
Michael Ponting, Jong Keum, Benny Freeman, Anne Hiltner, Eric Baer, May 2011
This paper examines the structure-property relationships of poly (caprolactone) (PCL) nanolayers confined by various polymer substrates. AFM, gas transport, and WAXS characterizations were utilized to demonstrate that confined PCL nanolayers crystallized as large in-plane lamellae of high aspect ratio. This phenomenon, previously observed only for poly(ethylene oxide) (PEO), may be a more general phenomenon of crystalline polymers. In-plane PCL lamellae were as effective as PEO in reducing the oxygen permeability by more than 2 orders of magnitude. Additionally, the confining polymer substrate was found to affect to orientation of the PCL nanolayers due to chemical compatibility or epitaxial induced crystallization.
The processability of meat-and-bone-meal (MBM) proteins via thermal routes was investigated. Batch compounding and compression molding were used to determine optimal compositions and processing parameters. The sheets were studied for their water vapor permeability, mechanical properties and environmental aging effects. The relative humidity (RH) of the ambient air played a significant role in the processing of the compounded protein.. Sheets were formed at 40-50% RH. As expected, mechanical properties of the sheets were also found to be moisture sensitive. Particle size of MBM raw material was also found to significantly affect the texture and mechanical properties of sheets.
Ke Li, Jun Peng, Xiaofei Sun, Lih-Sheng Turng, Han-Xiong Huang, May 2011
Foamed PLA/PBAT blends were processed via the microcellular injection molding process using supercritical N2 as a blowing agent. The effect of composition ratio on cell morphology, thermal properties, and mechanical properties of microcellular PLA/PBAT blends was investigated. Results showed that neat PLA presented a relatively small cell size and the cell size became larger from the skin to the central area. With increasing PBAT content, the cell size also increased, while the size distribution of the cells became uniform. The thermal properties of PLA, especially Tg, were slightly affected by the addition of PBAT. The crystallization behavior was noticeably influenced.
Shirley Hsu, Lih-Sheng Turng, Tim Osswald, Natalie Rudolph, Eugene Dougherty, Patrick Gorton, May 2011
In this study, the rheological behaviors of single-phase LDPE/N2 solutions at various gas contents are measured using a high-pressure slit-die rheometer. The resulting rheology data of LDPE/N2 are curve fit using the Cross-WLF model, which were then used in simulation of microcellular injection molding processes. The pressure effect on the shear viscosity is also studied. In addition, A 3D plot of viscosity as a function of shear rate, pressure and temperatures has been constructed, which is more profound at high pressures, low temperatures, and low shear rates.
Olga Kuvshinnikova, Albin Berzinis, Brian Keir, May 2011
Acrylonitrile-styrene-acrylate (ASA) alloy formulated in nineteen high chroma colors were exposed for 10 years of natural (outdoor) weathering in Florida and in Arizona, and 10,000 kJ/m2 of artificial accelerated weathering testing under ASTM G26 protocol. Exposed specimens were evaluated numerically and visually to assess the color shift, and ten out of nineteen colors demonstrated excellent color stability after 10 years of outdoor exposure. It was observed that both colorant package and weathering protocol are the key factors for determining the color durability of the formulated blends. The accelerated test appeared over-predicting color shift observed in the natural weathering tests.
Cybele Lotti, Rogerio M. Moreno, Satinath Bhattacharya, Luiz H. Mattoso, May 2011
Natural rubber (NR) is a biopolymer whose properties depend on the structure of the 1,4-cis polyisoprene chains, non-rubber constituents, environmental conditions. NR has been characterized by traditional methods, but these cannot effectively account for clone's differences. The aim of this work is to use extensional rheology to characterize and differentiate NR samples as for clone type and season of the year. Three IAC 300 series and RRIM 600 clones of Hevea brasiliensis tapped between October 2006 and August 2008 were investigated. The extensional viscosity varied considerably and was more sensitive than any other traditional property, being fundamental for monitoring purposes.
Simulation of single-screw extruder screws using the standard pseudo-Newtonian method is known to deviate from measured performance. Part of this deviation is caused by the calculation of the drag flow rate. Previous research has shown that the calculation of the drag flow rate using this method is higher than that in the actual channel, causing the pressure gradient to be incorrectly adjusted to compensate for the error in the drag flow term. The research here provides the correction factors for rotational flow (historically known as drag flow) such that axial pressure gradients can be quickly and accurately calculated.
Christian Hopmann, Walter Michaeli, Silke Allert, May 2011
The use of pulsed cold water instead of tempered coolant is suggested to be a versatile and cost-efficient technique for the cooling of injection molds. But the advantages and limitations of such discontinuous cooling strategies are still a controversial issue. In this paper the behavior of a discontinuous temperature control system is analyzed. The heat balance of a test mold is monitored and the inter?ªaction of adjacent cooling circuits is identified. It is demonstrated that the appropriate placement of the sensor whose signal is used as an input variable for the temperature control system is of crucial importance.
Felixine Siegmund, Manisha Gupta, Xiaomin Zhu, Edmund Haberstroh, Martin Moller, May 2011
Polyesteramides are among degradable polymers, which are of great interest for a wide variety of applications. In this paper we report a novel reactive extrusion process for the continuous synthesis of polyesteramides. It is based on anionic ring-opening polymerization of e-caprolactam in the melt of commercially available polyester - polycaprolactone. By this means polyesteramides of different chemical compositions were successfully prepared with high yield. Process simulation was carried out using obtained process and material data.
To demonstrate the feasibility of infrared welding of engineering thermoplastics, studies on PA66 and PBT were conducted. The weldability of engineering thermoplastics is demonstrated in the investigations carried out. Important process parameters such as pressure control, change-over times and tolerances in positioning the IR emitter were identified. It is remarkable, that engineering plastics (PBT & PA66) that are similar in use have a totally different melting behavior. The melting process has to be adapted accurately to meet the specific requirements of the material.
Joel Carr, Matthew Mackey, Anne Hiltner, Eric Baer, May 2011
Polymer films with enhanced dielectric properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of microlayering and biaxial orientation, polymer films using PET and a PVDF copolymer were produced which exhibit breakdown fields as high as 1000 kV/mm and energy densities as high as 16.2 J cc-1. Using needle/plane electrodes the fracture zones were investigated and it was evident that the layered films possessed a different fracture mechanism when compared to the single component films.
Mike Vasquez, Neil Hopkinson, Barry Haworth, May 2011
Polymer laser sintering is an Additive Manufacturing technology that has been implemented in a variety of industries from automotive and aerospace to the sports and leisure sector. This paper will explore the use of hot stage microscopy (HSM) and differential scanning calorimetry (DSC) to measure and observe powder polymer behavior with respect to the requirements for laser sintering. By observing this behaviour in a range of polyamides and thermoplastic elastomers, the results can be used as a tool for improved development of future materials, and potentially for process optimization, allowing laser sintering to compete in high volume manufacturing environments.
Christian Hopmann, Walter Michaeli, Tilo Hildebrand, May 2011
The combination of PE-LD and CO2 to extrude foamed semi-finished products is widely spread. Especially for the extrusion of foamed sheets the decrease in density and cell size leads to an effect, which reveals a wavy pattern transverse to the machine direction and is known as corrugation. Since this effect has not been investigated yet, it is systematically investigated in a research project at the IKV. The aim of the project is to determine the foaming, process and foam parameters which lead to corrugation and thereafter develop strategies to minimize the corrugation in foamed sheet extrusion.
84 countries and 60k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
.jpg)
.jpg)
.jpg)
.jpg)
