The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?
What is Intellectual Property (IP)? IP commonly refers to creations of the human mind: New discoveries, New product designs, Original pieces of art, music, drama and literary work (including software codes) and Recognizable brands. When IP is protected by law, it gives rise to IP rights and IP assets: IP rights give IP owners control over the use of their IP: (i) for themselves and their licensees; and (ii) for a specific period of time.
Migration of Plasticizer: Diffusion rate = diffusion coefficient .concentration gradient; Diffusion coefficient –molecular weight, property of the diffusing medium (density, crystallinity, glass transition temperature), plasticizer -diffusing medium interaction, temperature, pressure etc.; Plasticizer migration can compromise the mechanical strength and aesthetic appearance of plastics.
Improve performance of polymers and chemicals. Image beam sensitive materials.
In situ solutions for polymers and chemicals. Multi modal microscopy. Correlative microscopy. Advanced microscopy in 3D
Chemical solutions for a circular economy: Mechanical recycling (Re-use: PET/PP/PE); Plastic waste to fuel (Conversion: PP/PE); Plastic waste to fine chemical (PS); Dynamic reversible crosslinker; Self-immolative, polymers; Fully recycle monomer-polymer-monomer; Bioplastics
Autodesk Generative Design: Multiple methods of Manufacturability (Additive, Subtractive, Formative); Multiple materials; Combinations of Loads; No defined Volume; Part Consolidation
What is XRF?A method for qualitative and quantitative analysis of the elemental composition by excitation of atoms and detection of their characteristic X-rays. Polymer analysis with XRF, how does it work? Minerals: Calcite CaCO3; XRF provide elemental information; Stoichiometry by calculation or user input (CaO or CaCO3); Evaluation based on 100% known matrix, i.e everything is measured; Polymer: matrix is balance (100-X) as {CxHyOz}.
6 research platforms dedecated to sustainable development: New energies; Biosourced materials; Water treatment; Home efficiency and insulation; Lightweight materials; Consumer electronics.
What is Aerogel? Lightest but strong solid material with extreme low densities of 3 to 40 mg/cm3. Highly porous materials (> 99% of air) with large surface area. Objectives of the using coffee for aerogel: Repurpose food wastes into something useful while keeping environmental impacts to a minimum; Design a FULLY BIODEGRADABLE aerogel for various applications; Sustainable processing development for designed coffee aerogels; Functionalize the aerogels towards certain applications.
INVESTIGATING THE EFFECT OF THE FEEDSTOCK SHAPE ON ULTRASONIC MICROINJECTION MOULDING
M Gulcur | B. R. Whiteside | P. D. Coates, March 2019
Ultrasonic microinjection moulding technology uses ultrasound energy for melting the standard pellet-shaped polymer feedstock used in the plastics industry to facilitate melting of the material prior to the flow into the mould cavity. During the melting phase, the pellets are compressed against the sonotrode surface by using appropriate forces applied by an injection plunger. The pellets act as conductors of the acoustic energy and the contact points between the pellets act as initiators of the melting due to an interfacial friction heating mechanism. Both the pellet geometries and contact areas vary from shot to shot (due to variations in the pellet manufacturing process and the random distribution of pellets as they fall into the melting chamber) which causes process variation and a lack of repeatability of final product quality.
In order to overcome these issues, a more regular feedstock geometry was adopted. Identical disc shaped preforms were used in an ultrasonic micromolding process and compared with the process using standard pellets. The temperature distribution within the material was monitored for each feedstock geometry using a high-speed infrared camera. Characteristic features of the temperature profiles were analyzed and compared together with the final part quality. Results suggest that the initial contact interfaces of the polymer feedstock play a significant role in ultrasonic micromolding for micro-feature replication.
In this paper, the simulation of multiple variations of mixing elements and their results are presented. It is intended to create reliable information on how rather unconventional mixing elements in comparison to standard mixing elements can help to improve melt homogeneity. Therefore, a post processing method is developed to indicate the mixing efficiency of each simulated geometry. Finally, a conclusion is given recommending certain geometry parameters to optimize individual mixing elements.
High density polyethylene is challenging to use in standard additive manufacturing methods today, but would provide desirable properties such as chemical resistance, lightweighting, and durability to enable applications beyond prototyping. In this work, we describe high density polyethylene blends with highly branched polyethylene or polyethylene copolymers that improve adhesion and reduce warpage, significantly improving printability in standard filament extrusion 3D-printing methods.
The effects of high-shear flow on cellulose nanocrystals (CNCs) are studied to demonstrate potential impacts of industrial processing. A microcapillary rheometer was used to characterize the shear thinning characteristics of CNCs at diverse concentrations. Shear thinning characteristics follow the Sisko model which allows reduction of the data onto time-concentration superposition master curves. Shift factors follow a Williams-Landel-Ferry-like (WLF) relationship.
Each model film is made in machine direction orientation and consists of two types of polyolefin; For some model films, a different compatibilizer was used; Each model film has a structure of ‘ABCBA’. Here, B is a tie layer; The thickness of the model films is from 2 mil to 2.5 mil, and the thickness of the skin layer is from 5 to 10%.
In this work, linear polypropylene (L-PP) and longchain branched polypropylene miscible blend (LCB-PP), both having comparable weight average molecular weight, zero-shear viscosity and polydispersity index, were used to produce nonwovens via melt blown technology in order to understand role of long chain branching on the fiber diameter distribution.
Continuous mixing technology was first developed in the early 1960’s in an effort to create continuous rubber processing traditionally done in batch form. Due to the method of melting and mixing in a highly efficient manner, it has found a niche in highly filled or shear sensitive mixing/compounding applications. Polylactide resins are shear and temperature sensitive polymers that can benefit from continuous mixing technology in both neat and compounded processing applications.
This paper presents the results of new extremely low emission (XLE) POM and low emission and improved odor PP long fiber reinforced thermoplastics (LFRT). The results highlight emissions that meet the current VOC requirements. Additionally, the products have significant improvement in odor and meet global demands.
The need to be able to directly join polymers to metals is growing. For example, in the drive to make batteries smaller, more energy efficient, longer lasting, and less expensive to manufacture, direct joining of polymers to metals offers many benefits. In this work, the use of a unique, commercially available, surface treatment method has been investigated as a potential method of making direct joining feasible.
Against a background of increasingly aggressive disinfection protocols being used in the medical sector, there is a compelling need for improved chemically resistant thermoplastics for medical device housings. We describe the development of exciting new materials, leveraging SABIC’s LNP™ copolymer technology to step beyond the performance of existing materials, such as polycarbonate and polybutylene terephthalate, showing compatibility with the most aggressive disinfectants currently in the market.
Flexil®, a polymeric modifier can be used to uniquely tune and modify various types of elastomers and polymers. The versatility of Flexil creates a new platform for engineers to slightly tune their matrix polymer without sacrificing the inherent performances for a variety of end applications.
Semi-crystalline polymers undergo necking followed
by stable drawing under tensile forces. Whereas, a rubber
extends many times its original length uniformly under
tension. The necking and drawing behavior of the semicrystalline
material can be modified by the addition of a
rubber layer. Finite element simulation of plastic-rubberplastic
tri-layers suggest that the applied stretch at which
the neck develops, and the natural draw ratio can be
controlled by varying the thickness of the rubber.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.