The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?
Ernst Schmachtenberg, Andreas Hegenbart, Sebastian Göbel, May 2005
Microwave induced plasma polymerization offers significant barrier improvement for PET bottles. This is essential to extend shelf life of sensitive beverages like beer especially in small bottles. For using the plasma process to coat the exterior of bottles a novel reactor concept is presented which proves to be highly suitable for industrial implementation.
Ernst Schmachtenberg, Klaus Skrodolies, Dennis Lippe, May 2005
This paper presents a flow model considering shear- and elongational viscosity as well as wall slipping effects of fibre-reinforced compression moulding compounds (SMC, GMT, LFT). The advantages compared to commonly used models are the improved computation of the pressing force and fibre orientation distribution.
Khairul Alam, Costas Tzoganakis, John Perdikoulias, May 2005
A major challenge in profile extrusion die design is flow balancing at the die exit as an unbalanced flow causes distortion of the profile. This is especially true for complicated profile dies with uneven thicknesses in certain sections of the die. In this work, we demonstrate the use of a factorial statistical design of numerical experiments to study the effect of geometrical parameters and polymer shear thinning behavior on the optimum flow balancing of a profile die.
Unlike many inks and coatings which can be somewhat “one dimensional”, hot stamping foils have multiple layers that perform different functions within the foil that contribute to a successful imprint or image. What makes this method of hot stamp decoration problematic is that any time one layer is changed it can have a direct affect on the outcome of a decoration. Without getting too technical we are going to address each layer and its contribution to the decoration of a plastic part.
Jiri Vlcek, Walter Kopytko, Martin Zatloukal, Birane Touré, May 2005
This paper describes a case study dealing with the development of a three-layer product on a feedblock coextrusion system. The problems or phenomena that occurred during the product development experiments are explained via flow simulation and the rheological properties of the materials used. The results of the study are compared with real film samples produced during the development
John Perdikoulias, Martin Zatloukal, Birane Touré, May 2005
The paper discusses how flow simulation is used to analyze and optimize the design of the coextrusion feedblocks. The results help to explain the reason behind certain design arrangements. A case study of a problem encountered in an actual, three-layer film production will be used to demonstrate how the design of the feed block merge section and the material flow properties, especially the elongational viscosity, can create conditions for the “wave” type interfacial instability.
A comparative rheological study of four pairs of isotactic and syndiotactic polypropylene resins with similar MFI was conducted. The rheological tests included double bore capillary rheometry, frequency sweeps and creep and recovery compliance. It was found that, for similar MFI, the viscoelastic behavior is significantly different between these two types of resins which suggest that stereoregularity has an important effect on the viscoelastic behavior of polypropylene melts.
R.M. Suffield, S.H. Dillman, J.E. Haworth, May 2005
Mixed tocopherols, ?-tocopherol, and ?-tocopherol were evaluated for antioxidant performance in ABS using oxidation induction time as the response. Three commonly used phenolic antioxidants and vitamin E (?-tocopherol) were used as controls. Mixed tocopherols were found to have a greater antioxidant effect than the hindered phenolic AOs or vitamin E in ABS. ?-tocopherol was found to be primarily responsible for the improved performance of mixed tocopherols.
Raymond Aufman, Matthew Dugovich, Joseph Busse, May 2005
During the injection molding process, shearinduced imbalances can have a drastic affect on many material properties. Samples of tensile bars were molded using an amorphous and semi-crystalline material at three different injection rates. The tensile bars were then Izod impact tested based on the location of the hot and cold side of the bars. A comparison was made to display the effects of the imbalances. The resulting impact strengths were then graphed accordingly and compared within each subgroup.
Nanocomposites based on biodegradable polycaprolactone (PCL) and mica clay organically modified with L-arginine were prepared through solvent blending. Their properties were analyzed with TGA, DSC, and tensile testing. The addition of the organically modified clay caused an increase in properties, but at large incorporation, properties began to decrease. Samples of 3%, 5% and 10% organically modified clay were compared to pure PCL.
Allan Boye Hansen, Frank Lechner, Michael Hampf, Alfred Kurz, Paul Andersen, May 2005
Interest in transportable modular production plants is on the rise. These containerized solutions combine flexibility with minimal expense for installation and start up. This presentation will highlight the issues surrounding a successful implementation of this concept for an insulated pipe construction used for offshore crude oil transport.
Injection molding barrel temperatures have high interaction and slow responses. The classical proportionalintegral-derivative (PID) control has difficulties to control for them accurately. An adaptive multi-input-multi-output (MIMO) generalized predictive control (GPC) scheme is developed, implemented and tested for barrel temperatures control of a reciprocating-screw injection molding machine. Experimental results illustrate GPC superiority over the traditional PID control.
Chang-Ming Wong, Shih-Jung Tsai, Chih-Hung Ying, Ming-Lang Hung, May 2005
This work examines the foam density of polystyrene (PS) blended with low density polyethylene (LDPE) at various ratios and the thermal conductivity of vacuum insulation panels (VIPs) using PS/PE with filers foams as core materials. The experimental results indicate LDPE strongly influences the foam density of PS/PE foam and the content of open-cell in PS/PE with fillers foam. A higher content of open-cells in PS/PE with fillers foam can lead to a lower thermal conductivity of VIP.
Composites consisting of the same material with different reinforcement and matrix shapes, such as fibre and matrix phases, can create high interfacial strength. This paper concentrates on the experimental investigation of all-polypropylene single phase composites. It is interestingly noteworthy that reinforced homo PP composites exhibited superior energy absorption capability when compared with their virgin counterpart for both static and dynamic impact test.
Saeeda Naz, John Sweeney, Peter Olley, Phil D Coates, May 2005
We have carried out experiments on UHMWPE in uniaxial compression in which we have measured the stress-strain and stress relaxation behaviour, covering a wide range of strains and strain rates. A constitutive model that makes use of Eyring processes has been developed and implemented numerically. This model can represent rate-dependent stress – strain behaviour. We have derived a set of values for the model parameters such that it gives a good representation of the observations.
This paper presents a true three-dimensional numerical simulation of the mold filling and packing in injection-molded part. The segregated finite element method and control volume finite element are combined with VOF method to solve the flow/temperature field and to track the melt front advancement during the process. The iterative solver (SOR) was employed for the solution of the equations. Several numerical examples are compared with Hele-Shaw approximation.
Radio Frequency (RF) welding, also known as High Frequency (HF) welding, is often a preferred means of fabricating products made of polar thermoplastic materials. Thermoplastic materials with low dielectric loss factors, such as thermoplastic vulcanizates (TPVs) have presented a challenge to RF welding. Modification of traditional RF welding equipment has been studied to characterize successful RF welding of TPVs with varying rubber to plastic ratios.
A fluoropolymer additive can be used to aid in the processability of resins and to improve some physical properties of the final part. The changes in processability and physical properties are explored. This study examines the effects of the base resin with a loading of fluoropolymer at 0.00% , 0.10%, 0.25%, and 0.50%. Several experiments were run to determine the effects of the fluoropolymer on processing and physical properties.
We study the effect of the length of an alkane bridge on the equilibrium geometry of biphenyl. We rely on DF theory within the 6-31G* ab-initio framework to determine local energy minima and geometries. We discover that the effect of the bridge length is decidedly nonlinear.
84 countries and 60k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
.jpg)
.jpg)
.jpg)
.jpg)
